1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Impromptu Jig

Discussion in 'The Tool Shed' started by Rich M., Jan 15, 2017.

  1. Jan 15, 2017
    Rich M.

    Rich M. Shoe salesman 2024 Sponsor 2023 Sponsor 2022 Sponsor

    Maryland
    Joined:
    Mar 23, 2008
    Messages:
    2,189
    Needed to cut some dom to fit my bushings. Futzed around with angle, clamps etc but it was just an aggravation. I have a magnetic base drill. I used a telescoping section of dom and scrap of rectangle tube it conveniently fit IMG_20170115_162239_799-1.jpg IMG_20170115_162053_081-1.jpg in. Tacked it all together. Worked like a champ. Just couldn't justify buying a jig for the small number of cuts.
     
    Rich M., Jan 15, 2017
    #1
  2. Jan 15, 2017
    47v6

    47v6 junk wrecker! 2023 Sponsor 2022 Sponsor

    USA
    Joined:
    Oct 25, 2006
    Messages:
    5,801
    nice!
     
    47v6, Jan 15, 2017
    #2
New Posts