1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

I Wanted To Up Date Everyone On The Build

Discussion in 'Intermediate CJ-5 and CJ-6 Tech' started by johnD, Jul 20, 2018.

  1. Jul 20, 2018
    johnD

    johnD FUBAR

    Morgantown, PA
    Joined:
    Mar 3, 2018
    Messages:
    76
    I place the tube on the frame.

    [​IMG]

    [​IMG]
    [​IMG]
    Then started primer the other parts!

    [​IMG]

    [​IMG]

    [​IMG]
     

    Attached Files:

    Muzikp, Rich M. and TuxParkIV like this.
  2. Jul 26, 2018
    johnD

    johnD FUBAR

    Morgantown, PA
    Joined:
    Mar 3, 2018
    Messages:
    76
    I sprayed my tube and other parts with a spray gun. First time doing something like this! I used 2k urethane from Eastwood. The gun from Eastwood also, but it was clogging at the tip. So here are the pic.

    upload_2018-7-26_17-28-42.png
    upload_2018-7-26_17-28-55.png

    upload_2018-7-26_17-29-24.png

    upload_2018-7-26_17-29-38.png

    upload_2018-7-26_17-29-55.png
     
    loootninja, heavychevy and Muzikp like this.
  3. Jul 26, 2018
    sterlclan

    sterlclan Member Sponsor

    exploring the...
    Joined:
    Feb 21, 2009
    Messages:
    2,520
    clogging at the tip means paint too thick,or way too fast of a reducer.or low air pressure
     
  4. Jul 26, 2018
    johnD

    johnD FUBAR

    Morgantown, PA
    Joined:
    Mar 3, 2018
    Messages:
    76
    Thanks!
     
  5. Jul 26, 2018
    heavychevy

    heavychevy Sponsor Sponsor

    Danielsville georgia
    Joined:
    Sep 7, 2008
    Messages:
    198
    Looking good.!!
     

Share This Page

New Posts