1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

HID Headlight Conversion

Discussion in 'Early CJ5 and CJ6 Tech' started by firulice, Mar 28, 2009.

  1. Mar 28, 2009
    firulice

    firulice New Member

    Utah
    Joined:
    Jul 24, 2008
    Messages:
    35
    So I'm going to Moab next week for the first time to try the CJ and decided I need more light output. So I ordered a set of headlight h4 conversion headlamps and then decided to take it a step further and do an h4 HID conversion. Also added some Aux lights front and rear. I took it out last night and wow what a difference! Here are a few pics:

    [​IMG]
    cut the back out of the mount
    [​IMG]
    one down
    [​IMG]
    side by side comparrison
    [​IMG]
    [​IMG]
    [​IMG]
    light output difference
    [​IMG]
    balast
    [​IMG]
    [​IMG]
    rear light
    [​IMG]
    [​IMG]
    front aux lights... thanks Eric! (cheap idea from another forum member)
    [​IMG]
    much better than a few hours before!
    [​IMG]
     
  2. Mar 28, 2009
    Patrick

    Patrick Super Moderator Staff Member

    Los Alamos, NM
    Joined:
    Sep 22, 2002
    Messages:
    8,360
    Looks good! I'm a firm believer in having enough light..
    I have Delta Tech H4 conversion headlights. On the rear, I run the rubber housed tractor lights. Matter of fact, I have them on my pickup and my ZR2 Blazer as well.
    [​IMG]
     
  3. Mar 28, 2009
    Patrick

    Patrick Super Moderator Staff Member

    Los Alamos, NM
    Joined:
    Sep 22, 2002
    Messages:
    8,360
    I see you have BFG MT KM2's. Are those 33X10.50's?
     
  4. Mar 29, 2009
    sdcj6

    sdcj6 Sponsor

    San Diego
    Joined:
    Sep 25, 2002
    Messages:
    366
    I hope to see you at Moab. I will shield my eyes from the bright lights
     
  5. Mar 29, 2009
    jpflat2a

    jpflat2a what's that noise?

    Hermosa, SD
    Joined:
    Jul 30, 2003
    Messages:
    8,523
    are they street legal ?
     
  6. Mar 29, 2009
    firulice

    firulice New Member

    Utah
    Joined:
    Jul 24, 2008
    Messages:
    35

    Thanks man... yeah they are the 33x10.50-15's... I love em so far!
     
  7. Mar 29, 2009
    firulice

    firulice New Member

    Utah
    Joined:
    Jul 24, 2008
    Messages:
    35
    Yeah that would be fun! The cut off of the head lamps is actually really low. I need to adjust them up to the proper level so they extend out far enough. They will stand out though that's for sure :)
     
  8. Mar 29, 2009
    firulice

    firulice New Member

    Utah
    Joined:
    Jul 24, 2008
    Messages:
    35
    The conversion headlamps are DOT approved...not sure on the HID's...I'll look later. Good thing is they only use 35 watts but throw out a lot of white light
     
  9. Mar 29, 2009
    cj6/442

    cj6/442 Sponsor

    Fallbrook, Calif
    Joined:
    Feb 6, 2008
    Messages:
    2,734
    I like them alot better than your hi- lift idea.......just kidding you .......don't get mad......how much for the conversion where did you score that set-up,,,,,I have the h4's with 55/60?'s but those are really bright I'm sold ,looks good .....but why did you have to cut the buckets ,looks like enough room there??????
     
    Last edited: Mar 29, 2009
  10. Mar 29, 2009
    OrangeCJ5

    OrangeCJ5 Sponsor

    Taylorsville, UT
    Joined:
    Apr 29, 2003
    Messages:
    422
    Those look awesome! I have been wanting to so something similar. Good to see it all done up right. Nice job.
     
  11. Mar 30, 2009
    firulice

    firulice New Member

    Utah
    Joined:
    Jul 24, 2008
    Messages:
    35

    Ha ha I wouldn't get mad over that... that's what these forums are for...sharing info and ideas. I cut the buckets so I could have easy access to change out the bulbs if needed. Say a bulb or balast goes out, I can switch to the halogens in seconds instead of having to take out the headlamp from the front to get to it. Just easier I guess. The balast plugs right into the oem bulb socket for power. I got the HID kit from a guy that sells on ebay. There are a ton of sellers on there that sell them but I have bought a number of kits from this guy for motorcycles and my truck and they are quality. He gives me a discount for having bought several times so the kit was only like $140ish shipped. I went with the 6000k which is my favorite. The light output is awesome.
     
  12. Mar 30, 2009
    firulice

    firulice New Member

    Utah
    Joined:
    Jul 24, 2008
    Messages:
    35
    Thanks man I appreciate that :)
     
  13. Mar 30, 2009
    Patrick

    Patrick Super Moderator Staff Member

    Los Alamos, NM
    Joined:
    Sep 22, 2002
    Messages:
    8,360
    Yeah, I searched on ebay for "HID conversion"..
    Holy crap.........
     
  14. Mar 30, 2009
    cj6/442

    cj6/442 Sponsor

    Fallbrook, Calif
    Joined:
    Feb 6, 2008
    Messages:
    2,734
    can you pm me the sellers #/info so I get the right guy and don't have to worry , thanks
     
  15. Mar 30, 2009
    Vanguard

    Vanguard Take Off! Staff Member

    Vista, CA USA
    Joined:
    Aug 30, 2006
    Messages:
    2,259
    Looks like a great conversion. Where the conversion H4s branded and if so, how was the quality.
     
  16. Mar 30, 2009
    firulice

    firulice New Member

    Utah
    Joined:
    Jul 24, 2008
    Messages:
    35
    Sure thing...
     
  17. Mar 30, 2009
    firulice

    firulice New Member

    Utah
    Joined:
    Jul 24, 2008
    Messages:
    35
    The bulbs were a direct fit with the 3 tabs fiting into the h4 slots. Also has a shield on the front of the bulb. The cut off is really sharp so it's great for throwing out a lot of light but not shining everywhere...including oncoming drivers eyes. I'll get some pictures this week of the light at night while in moab and post them on here. But yeah, kit is a direct plug and play and can be switched back in seconds if needed. I've used several kits from this guy and they are german made and high quality...never had an issue.
     
  18. Mar 30, 2009
    DrDanteIII

    DrDanteIII Master Procrastinator

    Milford NJ 08848
    Joined:
    Mar 21, 2007
    Messages:
    1,516
    x2. If you don't mind.


    Thanks!
     
  19. Mar 30, 2009
    firulice

    firulice New Member

    Utah
    Joined:
    Jul 24, 2008
    Messages:
    35
    Done :)
     
  20. Mar 30, 2009
    Warloch

    Warloch Did you say Flattie??? Staff Member

    Falcon, CO
    Joined:
    Mar 4, 2003
    Messages:
    5,470
    Heck - just post it - I know there are lots of folks who like to find a 'good' source for these.
     
New Posts