1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Heater hoses

Discussion in 'Early CJ5 and CJ6 Tech' started by Desert Runner, Oct 14, 2008.

  1. Oct 14, 2008
    Desert Runner

    Desert Runner Member 2024 Sponsor 2022 Sponsor

    Hickory, Pa
    Joined:
    Sep 11, 2005
    Messages:
    819
    I am looking at putting the moab heater in the 65, but of all the pictures I took prior to the tear down, I have one hose just hanging.:? (note: when I started, the engine didn't have a water pump) One hose goes to the outlet on the block. the other hose I have no where to connect. The water pump only has one port, for the radiator hose. It does have two pipe plugs, does it go there? If anyone has a pic I would be extremely grateful.......monkeys

    Jay
     
    Desert Runner, Oct 14, 2008
    #1
  2. Oct 15, 2008
    EricM

    EricM Active Member

    Southern California
    Joined:
    Dec 19, 2007
    Messages:
    1,019
    It should fit in one of the pipe plugs on the waterpump. Here's some pictures of my hoses:

    [​IMG]

    [​IMG]

    sorry this one is a little blurry:

    [​IMG]
     
    EricM, Oct 15, 2008
    #2
  3. Oct 15, 2008
    Desert Runner

    Desert Runner Member 2024 Sponsor 2022 Sponsor

    Hickory, Pa
    Joined:
    Sep 11, 2005
    Messages:
    819
    PERFECT!!! Thanks I know exactly where that plug is :)

    There will be heat this winter!!!!!
     
    Desert Runner, Oct 15, 2008
    #3
New Posts