1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

front axle

Discussion in 'Intermediate CJ-5/6/7/8' started by thefrog, Dec 7, 2004.

  1. Dec 7, 2004
    thefrog

    thefrog the frog man

    va beach
    Joined:
    Nov 29, 2004
    Messages:
    31
    i started gathering parts to repair my fried front hub. i thought about going to disks but i will have to buy new rotors and calipers, the ones i found i couldnt save. after some part research i found it would be semi xpensive. i am planning on putting 35s on it soon. would i be better off just putting a 44 up front or fix the 30.
     
    thefrog, Dec 7, 2004
    #1
  2. Dec 7, 2004
    lynn

    lynn Time machine / Early CJ5 HR Rep Staff Member

    Huntingdon PA
    Joined:
    Sep 20, 2002
    Messages:
    3,437
    The "generally" accepted thought is the D30 is OK with 33s, and will take a fair amount of abuse. Running 35s can break it much quicker, depending on the terrain and your right foot. Sure lots of guys run 35s on a D30 without problem... but the D30 just won't be as forgiving with 35s as it will with 33s.

    JMHO, YMMV ;)
     
    lynn, Dec 7, 2004
    #2
  3. Dec 7, 2004
    Chuck

    Chuck Sponsor

    Southshore Ma
    Joined:
    Sep 19, 2004
    Messages:
    1,463
    I agree with Lynn, you can get by with the D30, but it all depends on the way you drive.
     
    Chuck, Dec 7, 2004
    #3
  4. Dec 7, 2004
    oakesmi2

    oakesmi2 New Member

    Flagstaff, AZ
    Joined:
    Oct 2, 2002
    Messages:
    48
    ARB has a new kit to put D44 axles in a D30 housing, the kit also includes an air locker.
    I know it would be expensive but I was just wonding what you all think of this?
     
    oakesmi2, Dec 7, 2004
    #4
  5. Dec 7, 2004
    mb82

    mb82 I feel great!

    Charlottesville Va
    Joined:
    Mar 17, 2003
    Messages:
    2,706
    mike the problem that most people i have talked to about that upgrade is that if you break an axle then you have to have a spair no one else will have one to lend you. also do they have one for a cj yet? i know they have the TJ YJ XJ/MJ ZJ one but i have not heard of a CJ one yet.
     
    mb82, Dec 7, 2004
    #5
  6. Dec 7, 2004
    thefrog

    thefrog the frog man

    va beach
    Joined:
    Nov 29, 2004
    Messages:
    31
    thanks guys, i am not too bad with righty, but i do get ruff...i didnt know bout arb though, i will deffinatly check into that. are alloy shafts worth the $..
     
    thefrog, Dec 7, 2004
    #6
  7. Dec 7, 2004
    mb82

    mb82 I feel great!

    Charlottesville Va
    Joined:
    Mar 17, 2003
    Messages:
    2,706
    my opinion for what it is worth. not unless you broke stock shafts. its kinda one of those well i broke it might as well upgrade things.
     
    mb82, Dec 7, 2004
    #7
  8. Dec 7, 2004
    thefrog

    thefrog the frog man

    va beach
    Joined:
    Nov 29, 2004
    Messages:
    31
    thats what i kinda thought...i am gonna replace whats broke for now. when summer wheeling time comes and i inevitably break something i will have enough $ to go with a full custom d44 front...
     
    thefrog, Dec 7, 2004
    #8
  9. Dec 7, 2004
    XJ_Ranger

    XJ_Ranger Tide rocks my socks off

    Lincoln, NE /...
    Joined:
    Nov 14, 2004
    Messages:
    25
    a d30 that isnt locked will hold up to a TON more than a locked d30, so the alloy shafts would be a good idea if you get a locker. Otherwise - normal d30 shafts can be found at any autozone, advance auto... bla bla bla where a non stock spline different shaft is harder to find. Look into makiing a front hub a weak point - thoes are easier to change and cheaper...

    All my advice is fully substantiated by my own opinion...
     
    XJ_Ranger, Dec 7, 2004
    #9
  10. Dec 8, 2004
    Posimoto

    Posimoto Hopeless JEEP Addict

    Minden, Nevada
    Joined:
    Aug 7, 2003
    Messages:
    4,538
    Skip the locker in the front and use a positraction and you can run 35's no problem. I've been to hell and back with 33's on my D27 and have never broken an axle or a U joint. Knock on wood!
     
    Posimoto, Dec 8, 2004
    #10
  11. Dec 8, 2004
    thefrog

    thefrog the frog man

    va beach
    Joined:
    Nov 29, 2004
    Messages:
    31
    i havent thought of posi up front...how well r they in mud though...i may just run the 30 and pony up for an air or elec locker
     
    thefrog, Dec 8, 2004
    #11
New Posts