1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Drag Link Part

Discussion in 'Intermediate CJ-5 and CJ-6 Tech' started by B-Rad, Aug 11, 2018.

  1. Aug 11, 2018
    B-Rad

    B-Rad New Member

    Dayton
    Joined:
    Jun 14, 2017
    Messages:
    42
    Hello, working on my 75 Cj5, I have it all back together from replacing the steering box. When I go to tighten up the drag link to the pitman arm it just spins. So I need just the end piece that can be adjusted with the sleeve. Is it the same thing as a tie rod end? Trying to get one today so I can drive it. Thanks
     
  2. Aug 11, 2018
    Oldriginal86

    Oldriginal86 Member

    Pasadena, Md.
    Joined:
    Nov 5, 2014
    Messages:
    361
    Should be the same if the steering is all stock. Be sure to check if it’s right or left hand threaded.
     
  3. Aug 12, 2018
    David Littleton

    David Littleton New Member

    St Louis MO
    Joined:
    Jan 21, 2018
    Messages:
    7
    Some times just putting a little pressure on the end just to push it in the link (hole) with a bottle jack and try to tighten it it will grab the pitman arm and tighten.
     
  4. Aug 13, 2018
    B-Rad

    B-Rad New Member

    Dayton
    Joined:
    Jun 14, 2017
    Messages:
    42
    THanks, finally got it on
     

Share This Page

New Posts