1. Tip...
    When posting in Classifieds, you can choose from the following menu prefixes in the Thread Title: For Sale, WTB or Free.
    Click on the X to dismiss this notice.
    Dismiss Notice
  2. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

For Sale Dana 30 Hubs , 11 " Bendix Drums , Shoes, & Hardware

Discussion in 'Intermediate CJ-5 and CJ-6 Classifieds' started by Lockman, Sep 7, 2019.

  1. Sep 7, 2019
    Lockman

    Lockman Since 1975 , It's not my Fault ! :shrug: Sponsor 2019 Sponsor

    White City, NY 14617
    Joined:
    Dec 4, 2018
    Messages:
    460
    This is for a Set of 2, off The front Dana 30 on my '75 CJ5. Powder coated Backing Plates & Drums . Wheel Cylinders and hardware with Adjusters . Hubs & bearings & Studs. All in Very good Condition . I'm Thinking around $ 250 & you cover the cost of shipping them to you . I can work with ya'all on the shipping : IE , creative ways !
    They are good , complete parts. I would like to get these to someone here,. I know they are of value to someone ,but for now , I'll keep them stored for when someone here needs to talk to me about them,:beer: Winter's acomin' & My Shop tends to get kinda closed in !
    Richie.... Lockman ( 585 ) 230- 8190
    Bendix.JPG
    Bendix 2.JPG
     
    Last edited: Oct 28, 2019
  2. Oct 1, 2019
    Warloch

    Warloch Did you say Flattie??? Staff Member Sponsor

    Falcon, CO
    Joined:
    Mar 4, 2003
    Messages:
    4,477
    You might do better if you assemble them and show they are complete. Years ago, that's how I would buy them from folks like R&P...

    I don't need fronts - might be looking for a set of rears soon though.
     
    Lockman likes this.
  3. Oct 1, 2019
    nickmil

    nickmil In mothballs. Sponsor

    Happy Valley, OR
    Joined:
    Sep 23, 2002
    Messages:
    11,459
    This.
    parts in a box don’t show how complete they are and that scares folks. Shipping on the hubs and drums can be expensive. Might offer the hubs separate from the brakes. Have the drums been measured to know they are in spec? People don’t want to pay shipping on parts they don’t know are good. Shipping is expensive these days.
     
    Lockman likes this.

Share This Page

New Posts