Dana 27 Part Numbers, Build Specs,

I thought I would list all the part numbers and specs I found during my Dana 27 rebuild process. Hope to make it easy for someone else to find what they need by putting it in one place. If you have more to add, please do. There are some numbers I don't have. I'll leave them blank on the list.

Wheel bearing (inner and outer) Timken LM501349

Wheel bearing race (inner and outer) Timken LM501310

Kingpin bearing Timken 11590

Kingpin race Timken 11520

Carrier bearing Timken LM501349 (same for Power Lock case)

Carrier bearing race Timken LM501311 (same for Power Lock case)

Inner pinion bearing

Inner pinion bearing race

Outer pinion bearing

Outer pinion bearing race

Pinion seal

Inner axle seal National 40576-S

Outer axle seal (in wheel hub) National 8430-S

Axle shaft u-joint Spicer 5260x, 5-260x

Pinion yoke speedi sleeve SKF 99155

Driveshaft u-joint V6, small, 1100 series Spicer 5-248x
4 cyl, larger, 1310 series Spicer 153x


Pinion depth, all ratios 2.094"

Ring gear runout not to exceed .006"

 

Knuckle Seal/Felt/Backer kit D25/D27/D44
- Dana Spicer
- 706207X (1x per side)

Spindle Nut Kit ( 1-5/8" x 16 tpi ... not confirmed)
-Dorman
-05304 (Complete 1x per side)
-Napa
-NOE 6301657

Brake Wheel Cylinder 10" Brakes
-Wagner
- WC40965 (1x per side)
-Dorman
-W37230 (LEFT)
-W37231(RIGHT)

Drive flange/Lockout hub Paper Gasket
-