1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Cj5 Drive Train Rebuild Info

Discussion in 'Winches' started by hoov, Sep 21, 2018.

  1. Sep 21, 2018
    hoov

    hoov New Member

    Joined:
    Dec 31, 2009
    Messages:
    1
    1970 CJ5, V6, dana 18 single lever, T14 and warn overdrive all stock. Been in the family since day 1.
    I will be rebuilding the tranny and transfer case soon.
    I am looking for a Koenig rear pto setup. Was one available for this year? Not sure which model to search for.
    Any suggestions

    thanks
     
  2. Sep 21, 2018
    TIm E

    TIm E Sponsor Sponsor

    NW Arkansas
    Joined:
    Mar 2, 2017
    Messages:
    395
    Welcome! I just rebuilt two of the same set-ups, one with overdrive. Just post up here if you have any questions. Don't wait too long though, my memory is really good...it is just short :D

    Curious on the D18 how an OD plus pto would work as they both use the same output on the t-case. Unless it is one of the pto's that mounts to the bottom of the case.
     
  3. Sep 27, 2018
    nickmil

    nickmil In mothballs. Sponsor

    Happy Valley, OR
    Joined:
    Sep 23, 2002
    Messages:
    11,368
    Warn, Husky, and others made an adapter that bolted to the back of the overdrive to allow use of a pto unit.
     
  4. Oct 17, 2018
    mickeykelley

    mickeykelley Active Member

    Republic of Texas
    Joined:
    Oct 10, 2015
    Messages:
    1,234
    Herm the overdrive guy makes that adapter.
     
  5. Oct 17, 2018
    jpflat2a

    jpflat2a what's that noise?

    Riverside CA
    Joined:
    Jul 30, 2003
    Messages:
    7,634
    as an example[​IMG]

    [​IMG]
     

Share This Page

New Posts