1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Can you help me identify this carburetor?

Discussion in 'Early CJ5 and CJ6 Tech' started by EricM, Sep 27, 2008.

  1. Sep 27, 2008
    EricM

    EricM Active Member

    Southern California
    Joined:
    Dec 19, 2007
    Messages:
    1,019
    Dear friends,

    Can you help me identify this carburetor? It is on a 225 V-6, I was told it is a Carter.

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    Thanks!

    Eric
     
    EricM, Sep 27, 2008
    #1
  2. Sep 27, 2008
    sparky

    sparky Sandgroper Staff Member Founder

    Perth, WA
    Joined:
    Sep 20, 2002
    Messages:
    9,221
    Yup. Looks like a Carter to me.
     
    sparky, Sep 27, 2008
    #2
  3. Sep 27, 2008
    Patrick

    Patrick Super Moderator Staff Member

    Los Alamos, NM
    Joined:
    Sep 22, 2002
    Messages:
    8,360
    Yep, Carter AFB. Or an Edelbrock Performer, which are made by Weber. Same carb either way...
     
    Patrick, Sep 27, 2008
    #3
  4. Sep 27, 2008
    kaiser_willys

    kaiser_willys Well-Known Member

    Joined:
    Jan 7, 2007
    Messages:
    1,524
    learn something new every day:) looks like a edelbrock to me, the only afb's i have seen were from back in the mid 50's era
     
    kaiser_willys, Sep 27, 2008
    #4
  5. Sep 27, 2008
    sparky

    sparky Sandgroper Staff Member Founder

    Perth, WA
    Joined:
    Sep 20, 2002
    Messages:
    9,221
    got one in my shed off my 66 Impala 327 that says Carter with a big C in a circle stamped on it. :)
     
    sparky, Sep 27, 2008
    #5
  6. Sep 27, 2008
    kaiser_willys

    kaiser_willys Well-Known Member

    Joined:
    Jan 7, 2007
    Messages:
    1,524
    R)R)R)you are as bad as me, still got the 327 out of my 67 elcamino in the shed with factory holley intakeR):beer:
     
    kaiser_willys, Sep 27, 2008
    #6
  7. Sep 27, 2008
    Patrick

    Patrick Super Moderator Staff Member

    Los Alamos, NM
    Joined:
    Sep 22, 2002
    Messages:
    8,360
    If was an Edelbrock, it'd have a Weber "W" cast into the top next to the air horn....
     
    Last edited: Sep 27, 2008
    Patrick, Sep 27, 2008
    #7
  8. Sep 27, 2008
    EricM

    EricM Active Member

    Southern California
    Joined:
    Dec 19, 2007
    Messages:
    1,019
    This one has a big C in a circle stamped on it. So is the consensus that it's an AFB? Are there mutiple versions of this? What would I ask for if I wanted to get a rebuild kit?
     
    EricM, Sep 27, 2008
    #8
  9. Sep 27, 2008
    Patrick

    Patrick Super Moderator Staff Member

    Los Alamos, NM
    Joined:
    Sep 22, 2002
    Messages:
    8,360
    Go to your reliable FLAPS with the numbers off the carb (probably the 2312 number) and they should be able to get you a kit. Or, order a kit for an Edelbrock from Summit or Jegs....
     
    Patrick, Sep 27, 2008
    #9
  10. Sep 28, 2008
    EricM

    EricM Active Member

    Southern California
    Joined:
    Dec 19, 2007
    Messages:
    1,019
    I did a little more hunting around and found this:

    [​IMG]

    It reads "J7 9400 S", I believe it is a Carter carburetor, 9400 series.
     
    EricM, Sep 28, 2008
    #10
New Posts