1. Tip...
    When posting in Classifieds, you can choose from the following menu prefixes in the Thread Title: For Sale, WTB or Free.
    Click on the X to dismiss this notice.
    Dismiss Notice

WTB Battery Trey And Support Brackets For 1967 Cj5

Discussion in 'Early CJ-5 and CJ-6 Classifieds' started by dal290la, Aug 2, 2017.

  1. Aug 2, 2017
    dal290la

    dal290la New Member

    Abingdon, MD
    Joined:
    Jan 31, 2009
    Messages:
    35
    Does anyone have a battery tray and the support rods for a 1967 CJ5?
    I have been looking for one for quite awhile PLEASE HELP!.

    Thank you for reading

    Dave
     
  2. Aug 2, 2017
    Alan F

    Alan F Sponsor Sponsor

    SE TX
    Joined:
    Jun 16, 2015
    Messages:
    147
    I bought the tie down bolts (rods) from Walck's when I needed them. I'm sorry I can't help,you with the tray.
     
  3. Aug 2, 2017
    dal290la

    dal290la New Member

    Abingdon, MD
    Joined:
    Jan 31, 2009
    Messages:
    35
    Alan thank you for the reply. I was not clear with my request, I need the support rods to the battery trey not the battery hold down rods.
    The 2 support rods I am in search of support the battery and trey and bolt to the fire wall. The aftermarket suppliers do not supply the replacement for a 64 -67.
     
  4. Aug 13, 2017 at 5:35 AM
    Diggerjeep

    Diggerjeep Member

    Joined:
    Oct 19, 2010
    Messages:
    196
    I have a battery tray out of a 62 or 64, which is the same as the one on my 68. This is the same location as my old 59. This battery tray sits, not on the firewall with support rods (pipes with flat crushed ends, like my 78 and 81), but rather is welded to the frame and sits immediately to the rear of the passenger side headlight. I don't know how to post a picture. If you send me your regular email address, I can send you a picture via email. I am cmoore967@gmail.com
     
  5. Aug 13, 2017 at 10:35 AM
    termin8ed

    termin8ed I didn't do it Staff Member Sponsor

    Mason, MI
    Joined:
    Dec 22, 2002
    Messages:
    2,043
    Im assuming he needs one that mounts to the firewall with a v6? Otherwise he wouldnt need the support rods. The frame mounted battery tray for the 4 cyl wont work with a v6
     
    dal290la likes this.
  6. Aug 13, 2017 at 11:12 AM
    Focker

    Focker Rust Never Sleeps Staff Member Sponsor

    Tri-Cities WA
    Joined:
    Aug 18, 2014
    Messages:
    3,877
    If you're not going for a correct restoration... Make your own...There's not much involved.
     
  7. Aug 13, 2017 at 12:15 PM
    dal290la

    dal290la New Member

    Abingdon, MD
    Joined:
    Jan 31, 2009
    Messages:
    35
    Yes that is correct my CJ is a V6 and the trey is mounted to passenger side firewall and has two support rods and 2 bolts that hold the trey to the firewall. I wish I had a picture of one.
    I will fabricate if I don't find one but I would like a correct replacement.
     

    Attached Files:

  8. Aug 13, 2017 at 1:17 PM
    Focker

    Focker Rust Never Sleeps Staff Member Sponsor

    Tri-Cities WA
    Joined:
    Aug 18, 2014
    Messages:
    3,877
    Here is my tray. I don't have a picture of the bottom support, but it's a tube that's been flattened on each end where the bolts go through.

    [​IMG]
     
  9. Aug 13, 2017 at 1:19 PM
    Focker

    Focker Rust Never Sleeps Staff Member Sponsor

    Tri-Cities WA
    Joined:
    Aug 18, 2014
    Messages:
    3,877

Share This Page

New Posts