1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Axle Assemblies

Discussion in 'Roxor Tech' started by Velociraptor_Implant, Nov 30, 2018.

  1. Nov 30, 2018
    Velociraptor_Implant

    Velociraptor_Implant New Member

    Dallas
    Joined:
    Jun 5, 2018
    Messages:
    8
    Front and Rear axle assemblies are now available. 19-spline front and rear, which isn't great, but they should be able to be converted to 30-spline once they get in some builder's hands.

    Front is $1070 and rear is $1000. Getting clarification if all of the braking hardware is included because the front calipers are $130 each.

    The spindle bolt pattern is the evenly spaced 6-bolt so the GeoTracker brake conversion may work for a fraction of the price.

    Spring to spring is 27.5" and WMS is 53.25"

    Springs are 2.5" wide, 36" in the front and 48" in the rear.

    Not a bad way to get a Dana 44 up front without going Wagoneer.
     
  2. Nov 30, 2018
    Jrobz23

    Jrobz23 Member

    Northern, WI
    Joined:
    Oct 3, 2016
    Messages:
    545
    For guys doing YJ spring mods these might be great as-is. You’d wanna regear em if you had a FHead.

    I think the front specifically will be a hot ticket item.
     
  3. Nov 30, 2018
    Daryl

    Daryl Sponsor Sponsor

    Bonney Lake, WA
    Joined:
    May 25, 2006
    Messages:
    2,800
    I think a new 19 spline 44 would hold up to any stock CJ power. The almost direct bolt in part is the real benefit to most.
     
  4. Dec 1, 2018
    1957Willys

    1957Willys Member

    Birmingham, Alabama
    Joined:
    Mar 23, 2012
    Messages:
    667
    I'm waiting on the price of the oxlocker to come down. Because it is a direct fit.
     
  5. Dec 8, 2018
    colojeepguy

    colojeepguy Colorado Springs Sponsor 2019 Sponsor

    At the foot of...
    Joined:
    Apr 4, 2010
    Messages:
    4,246
    I was at the dealer today and one of the first things I noticed was that disc brake 44....looked very close to a CJ axle!
     
    FinoCJ likes this.
  6. Dec 9, 2018
    Jrobz23

    Jrobz23 Member

    Northern, WI
    Joined:
    Oct 3, 2016
    Messages:
    545
    I think this front is gonna be a hot ticket swap item.
     
  7. Jun 15, 2019
    Cowboyjeeper

    Cowboyjeeper Member

    Show low az
    Joined:
    Mar 5, 2019
    Messages:
    247
    Has anyone confirmed if this will work I’d be very interested in the front disk brakes?
     
  8. Jun 15, 2019
    Jrobz23

    Jrobz23 Member

    Northern, WI
    Joined:
    Oct 3, 2016
    Messages:
    545
    I haven't seen anyone use one yet.

    To the OP, OnTheRoxFab has RCV 30 spline axles and a couple people have full float 30 spline kits already.
     
  9. Jun 15, 2019
    Cowboyjeeper

    Cowboyjeeper Member

    Show low az
    Joined:
    Mar 5, 2019
    Messages:
    247
    You mean a rear full float? Or is that a reference to the front? Guess I missed something. Have been through a lot of info today haha
     
  10. Jun 15, 2019
    Jrobz23

    Jrobz23 Member

    Northern, WI
    Joined:
    Oct 3, 2016
    Messages:
    545
    Full float rear kits. I’m pretty sure most fronts are already full float.
     
  11. Jun 15, 2019
    Cowboyjeeper

    Cowboyjeeper Member

    Show low az
    Joined:
    Mar 5, 2019
    Messages:
    247
    That’s what I thought too. Thanks for clarifying. Do you know if the front axle will work on our jeeps or is it just close?
     
  12. Jun 16, 2019
    Jrobz23

    Jrobz23 Member

    Northern, WI
    Joined:
    Oct 3, 2016
    Messages:
    545
    I'll have to get some closer measurements this week.
     
    Cowboyjeeper likes this.
  13. Jun 16, 2019
    Cowboyjeeper

    Cowboyjeeper Member

    Show low az
    Joined:
    Mar 5, 2019
    Messages:
    247
    That would be awesome if you could. I’m actually thinking of just getting some of these parts to see how well the work. Would be cool to have a open knuckle 44 up front.
     
  14. Jun 17, 2019
    Jrobz23

    Jrobz23 Member

    Northern, WI
    Joined:
    Oct 3, 2016
    Messages:
    545
    Both my Roxor and '57 seem about 28" (prolly give/take a half inch) spring center to center. I'm not seeing much to stop this swap besides gearing.
     
    Cowboyjeeper likes this.
  15. Jun 18, 2019
    Cowboyjeeper

    Cowboyjeeper Member

    Show low az
    Joined:
    Mar 5, 2019
    Messages:
    247
    That makes me feel a lot better bout this, gearing can be fixed since it’s a Dana 44
     
  16. Jun 27, 2019
    txtoller

    txtoller Member Sponsor 2019 Sponsor

    Weatherford, TX
    Joined:
    May 28, 2014
    Messages:
    422
    Hmmmm, what to do? I will have to go to the local dealer and price it all out. Maybe, easier then swapping axles from my 71 to my 69. Also, going to compare prices with Currie...
     
  17. Jun 27, 2019
    Cowboyjeeper

    Cowboyjeeper Member

    Show low az
    Joined:
    Mar 5, 2019
    Messages:
    247
    Right at 1100 for the front. And they make 30 spline shafts for them as well, that opens up locker choices.

    I’m wondering if germs 30spline full float kit will work on the rear. Buy the set and the master cyl/pedal set up that we know fits and you have a ready made axle and brake upgrade kit. I’m looking into this as well as if a terra low and overdrive can be made to fit their version of a Dana 18. If you could get terra low on there you could almost keep the 373d and still wheel it. Just thinking out loud thinking of buy some parts to see what I can do.
     
  18. Jul 1, 2019
    Heimbig2

    Heimbig2 Member

    Richland, WA
    Joined:
    Jan 13, 2003
    Messages:
    136
    Can anyone confirm what comes with thefront axle for $1100, does it include brakes? Also a part number if anyone has it for the front axle. Will an eaton e locker work if you change to a 30 spline axle kit?

    Thanks

    Mike
     
  19. Jul 1, 2019
    Jrobz23

    Jrobz23 Member

    Northern, WI
    Joined:
    Oct 3, 2016
    Messages:
    545
    ELocker will work from a ordinary D44. Call OnTheRox. They know/have the spacer depth you need to use.

    From the picture it looks like it has everything but the calipers and pads: 0503AAA00610N
     
    Cowboyjeeper likes this.
  20. Jul 1, 2019
    Cowboyjeeper

    Cowboyjeeper Member

    Show low az
    Joined:
    Mar 5, 2019
    Messages:
    247
    What jrobz23 said and I have confirmed that’s what my dealer will sell it for.
    Any locker for a 30 spline will work if you change shafts
     

Share This Page

New Posts