1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Anyone Experience The 40+ Year Old Glue Behind The Gauge Cover? Any Wisdom Welcome

Discussion in 'Intermediate CJ-5/6/7/8' started by 75CJ512JK, Jan 19, 2021.

  1. Jan 19, 2021
    75CJ512JK

    75CJ512JK New Member

    Tucson AZ
    Joined:
    Mar 15, 2017
    Messages:
    14
    Working on a 79 CJ renegade with the black plastic gauge surround/cover. Old one was cracked so I removed it thinking I could use Goo Gone and some elbow grease. Well it seems this stuff has cured past the point of being affected by Goo Gone/wd40/pb/etc. I soaked it about 4 hours and it still won't come off. I can kind of scrape it off with a plastic scraper but I'm afraid I'm damaging the awesome OEM paint (Russet).

    I won't be putting a new one on so I want to try to figure out a paint-friendly way to remove the cured adhesive.
     
    75CJ512JK, Jan 19, 2021
    #1
  2. Jan 20, 2021
    PeteL

    PeteL If it wasn't for physics, and law enforcement... 2024 Sponsor 2023 Sponsor 2022 Sponsor

    Hills of NH
    Joined:
    Aug 3, 2003
    Messages:
    9,823
    Gentle heat-soak?
     
    PeteL, Jan 20, 2021
    #2
  3. Jan 20, 2021
    timgr

    timgr We stand on the shoulders of giants. 2022 Sponsor

    Medford Mass USA
    Joined:
    Aug 10, 2003
    Messages:
    23,596
    This is the glue left behind when you removed the plastic overlay from the painted dash?

    I'd get a plastic putty knife and use gentle application of heat from a heat gun. Heat won't hurt the dash and should soften the glue.
     
    timgr, Jan 20, 2021
    #3
New Posts