1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Accelerator Pedal Setup

Discussion in 'Intermediate CJ-5 and CJ-6 Tech' started by OleBlue, Aug 1, 2018.

  1. Aug 1, 2018
    OleBlue

    OleBlue Sponsor Sponsor

    Tennessee
    Joined:
    Feb 14, 2010
    Messages:
    1,001
    What types of accelerator pedal setups are you guys running in your intermediates?
    Do any of you run a Lokar or similar universal setup? Pictures would help.
    I’m looking for something different than stock that has a better drivable angle to it, if that makes sense. I have Corbeau seats in my Jeep, and it feels like the accelerator pedal does not set well with the angle of my foot. Thanks
     
    Last edited: Aug 1, 2018
  2. Aug 1, 2018
    Muzikp

    Muzikp Sponsor Sponsor

    Sacramento Ca.
    Joined:
    Sep 27, 2016
    Messages:
    762
    I welded a bolt to the shaft which holds a skateboard bearing.

    [​IMG]

    Then I made a flat piece of steel pedal and welded a hinge to it and welded that to the floor.

    [​IMG]

    Super simple, super improvement.
     
  3. Aug 1, 2018
    heavychevy

    heavychevy Sponsor Sponsor

    Danielsville georgia
    Joined:
    Sep 7, 2008
    Messages:
    238
    Now that is engineering. Looks good
     
  4. Aug 1, 2018
    OleBlue

    OleBlue Sponsor Sponsor

    Tennessee
    Joined:
    Feb 14, 2010
    Messages:
    1,001
    Cool! So, similar to an early floor mounted pedal?
     
  5. Aug 1, 2018
    timgr

    timgr Jeepin' Nerd Sponsor

    Medford Mass USA
    Joined:
    Aug 10, 2003
    Messages:
    19,152
    Ribbed rubber stair runner is only a few bucks a foot at Home Depot. You could get a piece of that and glue it to your pedal for a non-skid surface. Looks cool otherwise!
     
  6. Aug 1, 2018
    Muzikp

    Muzikp Sponsor Sponsor

    Sacramento Ca.
    Joined:
    Sep 27, 2016
    Messages:
    762
    I thought about something like that but so far I like the skidding(?) skidable(?) surface. I haven't gotten it wet or muddy yet, but it seems nice to have my shoe slide on it as you press it. Going wheeling in a couple weeks, may change my mind and want traction after that (y).
     
  7. Aug 1, 2018
    Oldriginal86

    Oldriginal86 Member

    Pasadena, Md.
    Joined:
    Nov 5, 2014
    Messages:
    361
    Or put one of those barefoot looking pedals on it.
     
    Willy likes this.
  8. Aug 2, 2018
    IrishCJ6

    IrishCJ6 Member

    Wicklow Ireland
    Joined:
    Dec 6, 2010
    Messages:
    402
    I used a XJ Cherokee one for mine
     
  9. Aug 2, 2018
    45es

    45es Sponsor Sponsor

    Naches, WA
    Joined:
    Mar 31, 2007
    Messages:
    459
    If you like the old military style gas pedal like the ones used in the GPW or MB, go to Midwest Military website. They have replacements available.
     
  10. Aug 2, 2018
    OleBlue

    OleBlue Sponsor Sponsor

    Tennessee
    Joined:
    Feb 14, 2010
    Messages:
    1,001
    Any particular year or are they all alike? Picture?
     
  11. Aug 11, 2018
    OleBlue

    OleBlue Sponsor Sponsor

    Tennessee
    Joined:
    Feb 14, 2010
    Messages:
    1,001
    I got an XJ one today. How did you mount it? Did you mount the pivot in a different location than the stock CJ? If so, did you drill a new hole in the firewall for the cable? Or did you transfer the pedal and rod from the XJ pivot to the CJ pivot and keep the cable routing stock?
     
  12. Aug 14, 2018
    OleBlue

    OleBlue Sponsor Sponsor

    Tennessee
    Joined:
    Feb 14, 2010
    Messages:
    1,001
  13. Aug 15, 2018
    IrishCJ6

    IrishCJ6 Member

    Wicklow Ireland
    Joined:
    Dec 6, 2010
    Messages:
    402
    Sorry haven't been near the Jeep in a while and don't have a pic. I'll be there on Saturday so will try and get one then
     
  14. Aug 15, 2018
    OleBlue

    OleBlue Sponsor Sponsor

    Tennessee
    Joined:
    Feb 14, 2010
    Messages:
    1,001
    Thanks
     
  15. Aug 25, 2018
    OleBlue

    OleBlue Sponsor Sponsor

    Tennessee
    Joined:
    Feb 14, 2010
    Messages:
    1,001
    Were you able to get a picture?
     
  16. Aug 25, 2018
    duffer

    duffer Rodent Power Sponsor

    Bozeman, MT
    Joined:
    Sep 17, 2009
    Messages:
    2,392
    I built all the pedal/linkage for my 3B.
    [​IMG]

    [​IMG]

    [​IMG]
     
    Danefraz likes this.
  17. Aug 26, 2018
    IrishCJ6

    IrishCJ6 Member

    Wicklow Ireland
    Joined:
    Dec 6, 2010
    Messages:
    402
    Going to garage today, will make effort to get pic
     
  18. Aug 26, 2018
    IrishCJ6

    IrishCJ6 Member

    Wicklow Ireland
    Joined:
    Dec 6, 2010
    Messages:
    402
    Hopefully this is enough

    IMG_20180826_18266.jpg IMG_20180826_6559.jpg



    IMG_20180826_18266.jpg
     
  19. Aug 26, 2018
    OleBlue

    OleBlue Sponsor Sponsor

    Tennessee
    Joined:
    Feb 14, 2010
    Messages:
    1,001

Share This Page

New Posts