1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

8274 +&- Cable Routing

Discussion in 'Winches' started by jrsgoldenarm, May 11, 2020.

  1. May 11, 2020
    jrsgoldenarm

    jrsgoldenarm New Member

    pinellas park fl
    Joined:
    Nov 22, 2019
    Messages:
    25
    20200511_182812.jpg looking for ideas & pics of how to route the cables back to the battery will I have to drill a hole through the side of the radiator support to get into the engine bay?
     
  2. May 11, 2020
    Twin2

    Twin2 not him 2020 Sponsor 2019 Sponsor

    Virginia Beach, VA
    Joined:
    Apr 28, 2011
    Messages:
    4,157
    nope . just go underneath grill toward upper shock mount
    winch.JPG winch 1.JPG

    forgot to add . you don't need to go back to battery . just to starter
    a shut off switch isn't a bad idea too
     
    Last edited: May 11, 2020
  3. May 11, 2020
    Dphillip

    Dphillip Sponsor

    Omaha NE
    Joined:
    Nov 25, 2008
    Messages:
    301
    Here is a pix of mine.
    The control box is mounted in the bumper channel and the cables run underneath the fender to a master cut off switch.

    087E71AF-6BE1-47A5-8D5B-6C44A781EB24.jpeg
     
  4. May 11, 2020
    jrsgoldenarm

    jrsgoldenarm New Member

    pinellas park fl
    Joined:
    Nov 22, 2019
    Messages:
    25
    ok thanks can you connect the negative to a good ground like where the engine is grounded to the frame or all the way to the battery?Thks again
     
  5. May 11, 2020
    Twin2

    Twin2 not him 2020 Sponsor 2019 Sponsor

    Virginia Beach, VA
    Joined:
    Apr 28, 2011
    Messages:
    4,157
    both cables connect on engine . but make sure your engine is grounded to frame too
     
  6. May 11, 2020
    jrsgoldenarm

    jrsgoldenarm New Member

    pinellas park fl
    Joined:
    Nov 22, 2019
    Messages:
    25

Share This Page

New Posts