'81 CJ5 Renegade repair

I bought a rear D44 with moser axles in it. I reached out to them and they were responsive, etc. I'm not sure about other service, but I'd probably to to them if I needed replacements. The flanged axles I have use standard SET10 bearings (like $20 for a set of timken at RockAuto last I looked.)

 

Good to have her out of the garage and on all four wheels again.
.

 

Been toying with the idea of TBI for the Jeep. I have a list and a pretty good idea of what to look for.

Junk Yard TBI
88-91

TBI, Harness, Computer, Coolant Sensor, MAP sensor, ect. - 60.00 *price from a friend*

O2 Sensor weld ring Holley part #534-49 7.00
https://www.summitracing.com/parts/hly-534-49

Bosch 02 sensor part # 12014 20.00
http://www.autozone.com/emission-control...3189_1784/

Mr. Gasket part #1516 9.00
https://www.summitracing.com/parts/mrg-1516

Fuel pump part # E2182 70.00
https://www.summitracing.com/parts/atx-e2182

3/8" fuel Hose 8.00
https://www.summitracing.com/parts/dac-80080/overview/

Fuel Filter 3/8 6.00
https://www.amazon.com/FRAM-G15-In-Line-...uel+filter

8-Pin GM Ignition Module Auto Zone Duralast part # DR140 40.00
http://www.autozone.com/ignition-tune-up...ule/84780/

12v lamp 3.00 (SES)
https://www.radioshack.com/collections/l...p-assembly

fuel injector clamp 9.00
https://www.amazon.com/Fuel-Injection-Ho...ose+Clamps

Vacuum Plugs 3.00
https://www.amazon.com/Dorman-Help-47397...VNE40CGP5H

TBI Adapter Plate 80.00~95.00
http://www.hamiltonfuelinjection.com/pro...apter.aspx
http://howellefi.com/general-motors/gm-t...-.5-thick/

TOTAL COST~ $330

The junk yard TBI is cheaper than the ones you can buy pre assembled (Howell, AFI, Holley, EZ EFI, Edelbrock, etc.) but you have to do all the leg work
Check out Binder Planet. Bill has a great bit of information on fuel injecting just about anything.

 

TBI is just awsome i have it for two year and i won't come back to carb. I was lucky to find a use AFI kit for 250$ never regret it