1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

68-75 CJ5 Picture

Discussion in 'Early CJ5 and CJ6 Tech' started by p38L5, Jun 12, 2012.

  1. Jun 12, 2012
    p38L5

    p38L5 Member

    Napa CA
    Joined:
    Feb 5, 2012
    Messages:
    94
    Does anyone have a picture of 68-75 CJ5, particularly hood and windshield? I am trying to determine where the hood latch and bumpers for the windshield are located.

    Thanks,

    g
     
  2. Jun 12, 2012
    nickmil

    nickmil In mothballs.

    Happy Valley, OR
    Joined:
    Sep 23, 2002
    Messages:
    12,529
    There is no hood latch on that vintage of W/S frame. They used a hood prop instead. Can probably get a pic after work today. There was a bumper for laying the windshield on the hood and a tie point to tie it down.
     
  3. Jun 12, 2012
    timgr

    timgr We stand on the shoulders of giants. 2022 Sponsor

    Medford Mass USA
    Joined:
    Aug 10, 2003
    Messages:
    23,596
    To fold down the windshield, there is a footman loop on the hood, and a strap. There are a pair of bumpers which stand proud of the hood.

    I looked through my archive, but did not find a good pic of the hood. Maybe check pictures of the cars for sale on eBay.
     
  4. Jun 12, 2012
    p38L5

    p38L5 Member

    Napa CA
    Joined:
    Feb 5, 2012
    Messages:
    94
    O.K. Thanks guys, a picture would be great. Same bumpers as on the M38A1 windshield, or different? I'll check eBay motors.

    Regards,

    g
     
  5. Jun 12, 2012
    p38L5

    p38L5 Member

    Napa CA
    Joined:
    Feb 5, 2012
    Messages:
    94
    Got it - great picture on eBay. Now I know what to order. Thanks guys.

    Regards,

    g
     
  6. Jun 12, 2012
    nickmil

    nickmil In mothballs.

    Happy Valley, OR
    Joined:
    Sep 23, 2002
    Messages:
    12,529
    The ones you describe from M38a1 are for the earlier style of windshield. Will not work on the arched glass bottom mount wiper style.
     
  7. Jun 12, 2012
    theotherjmmy

    theotherjmmy Member

    Austin, Texas
    Joined:
    Mar 7, 2009
    Messages:
    156
    My 67 has the little thingy on the windshield frame that keeps the hood from flopping on your neck, but maybe they quit putting them on for the 68?
     
  8. Jun 12, 2012
    Washington68cj5

    Washington68cj5 Member

    Eastern Washington
    Joined:
    Feb 4, 2012
    Messages:
    50
    My 68 doesn't have a hood support so if a gust of wind hits it while your wrenching it would make for a bad smack on the head. I need some windshield bumpers too, happen to have a link to the ebay ones?
     
  9. Jun 12, 2012
    wheelie

    wheelie beeg dummy 2024 Sponsor 2023 Sponsor

    York, PA
    Joined:
    Mar 6, 2004
    Messages:
    4,503
    Here you can see the footman loop in the center for tying down the windshield and the rests for the windshield standing up on either side and rubber coated. No windshield pics. Hope this helps.

    [​IMG]
     
  10. Jun 12, 2012
    nickmil

    nickmil In mothballs.

    Happy Valley, OR
    Joined:
    Sep 23, 2002
    Messages:
    12,529
    When they went to the bottom mounted wipers with arched glass there was no longer room for the hood latch. That's when they started using the hood prop.
     
  11. Jun 12, 2012
    chuck123wapati

    chuck123wapati Member

    wyoming
    Joined:
    Jun 18, 2008
    Messages:
    761
    my 68 has the hood latch and hood bumpers, above window electric wipers
     
New Posts