1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Source for factory floor mat

Discussion in 'Early Jeep Restoration and Research' started by USMC_LB, Aug 2, 2009.

  1. Aug 2, 2009
    USMC_LB

    USMC_LB Member

    Tipton Co, TN
    Joined:
    Jul 3, 2009
    Messages:
    129
    Here is a picture of the mat in my 1967 Jeep CJ6.
    [​IMG]

    It is a one piece mat that covers the driver and passenger sides. Is there
    any source for factory mats or repros ?

    Tim in TN
     
    Last edited: Aug 2, 2009
    USMC_LB, Aug 2, 2009
    #1
  2. Aug 2, 2009
    timgr

    timgr We stand on the shoulders of giants. 2022 Sponsor

    Medford Mass USA
    Joined:
    Aug 10, 2003
    Messages:
    23,596
    ACC supplies rubber mats, but I doubt there is anything that is embossed "Jeep" like these.

    I repaired my rubber mats in my pickup with sheet vinyl from an upholstery store, and 3M black weatherstrip cement. If they were mine, I'd look for some material to patch them with from the back side (from the junkyard or where ever), and glue on a patch.
     
    timgr, Aug 2, 2009
    #2
  3. Aug 2, 2009
    SuperTodd

    SuperTodd Member

    Talent, Oregon
    Joined:
    Aug 17, 2007
    Messages:
    167
    if you do find a source let me know
     
    SuperTodd, Aug 2, 2009
    #3
New Posts