1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

HELP QUICK! mounting ez wire fuse box

Discussion in 'Early CJ5 and CJ6 Tech' started by Strider380, Aug 14, 2006.

  1. Aug 14, 2006
    Strider380

    Strider380 Can I have a zip tie?

    New England
    Joined:
    Jan 12, 2006
    Messages:
    1,117
    How do I mount this sucker? I have the easy wire kit end everything I need to do it including heat shrink, solder, terminal connectors, dielectric grease, extra zip ties, etc. Can't get past the first step.

    Its got clips on the back like it should slide into something but they gave me nothing for it to slide into. I'm thinkin maybe you just make your own holes and screw through the base, but the fuse unit won't seperate from the base, even though it looks like it should. I think there is a missing part to mount the dash?
     
  2. Aug 14, 2006
    Rampdog

    Rampdog knuckle buster

    Sandy, Oregon
    Joined:
    Mar 27, 2006
    Messages:
    105
    Mine disconnected from the base, Don't know how to tell you to do it, just take a long look and it will come apart. Yep, had to screw the base to the firewall, after that it was easy to reinstall the main body to the base, and finish up the wiring.
     
  3. Aug 14, 2006
    $ sink

    $ sink Gazillians of posts

    Virginia Bch
    Joined:
    Nov 25, 2004
    Messages:
    1,373
    Lag bolts! 5 of em, right through the middle. don't worry about all those little fuse clips, they'll take care of them selves...:twisted:



    well you wanted a fast answer
     
  4. Aug 14, 2006
    mike starck

    mike starck Member

    salem,oregon
    Joined:
    Jun 22, 2006
    Messages:
    762
    re:HELP i also purchased a EZ-wiring harness.12 circuit mini-fuse type.well guess what? i went and looked at the kit and your right,it seems like a piece to mount fuse block is missing.i will be calling them this morning and see what gives with the missing part.
     
  5. Aug 14, 2006
    mike starck

    mike starck Member

    salem,oregon
    Joined:
    Jun 22, 2006
    Messages:
    762
    RE:MOUNT yes i see that the base piece has 4 small taps that can be released with srewdriver and the base comes off. will drill a couple holes to mount to firewall then snap fuse block on to it.disregard earlier reply.i do agree that the unit was designed to slide on to another piece ,but E-Z must have figured it wasn't needed . Happy Wiring
     
  6. Aug 14, 2006
    Strider380

    Strider380 Can I have a zip tie?

    New England
    Joined:
    Jan 12, 2006
    Messages:
    1,117
    called the company, you need a flat head screwdriver to get the base off. from there you just drill your own holes, thanks guys
     
  7. Aug 14, 2006
    sparky

    sparky Sandgroper Staff Member Founder

    Perth, WA
    Joined:
    Sep 20, 2002
    Messages:
    9,221
    Thanks, now I know what to do with mine. :)
     
New Posts