1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

225 To A Ford T18 Clutch.

Discussion in 'Early CJ5 and CJ6 Tech' started by Ryan_289, Nov 30, 2020.

  1. Nov 30, 2020
    Ryan_289

    Ryan_289 New Member

    Arkansas
    Joined:
    Nov 9, 2020
    Messages:
    2
    I am mating a T18 4 speed from a ford to my Dauntless 225. I have ordered the correct pilot bushing from Novak and need to get the clutch setup. If I understand correctly, I will use the pressure plate for the 71 CJ5 dauntless motor and will need a disk for a Ford to mate up with the input shaft. Does anyone know what disk I need to order?
     
    Ryan_289, Nov 30, 2020
    #1
  2. Nov 30, 2020
    Jw60

    Jw60 Cool school 2024 Sponsor 2023 Sponsor 2022 Sponsor

    Sedalia MO.
    Joined:
    Apr 8, 2008
    Messages:
    4,811
    what does a Buick 350 powered fullsize jeep have in front of the t18?
     
    Jw60, Nov 30, 2020
    #2
  3. Dec 1, 2020
    garage gnome

    garage gnome ECJ5 welder

    Western MA
    Joined:
    Jun 19, 2009
    Messages:
    3,092
    garage gnome, Dec 1, 2020
    #3
  4. Dec 1, 2020
    Warloch

    Warloch Did you say Flattie??? Staff Member

    Falcon, CO
    Joined:
    Mar 4, 2003
    Messages:
    5,470
    The stock setup will work for the clutch, but I found a Luk Pressure Plate and Centerforce disc was the best combo.

    The Pilot Bushing has NOTHING to do with the clutch. It is based on the input shaft diameter of the tranny (inner diameter) to the Crank on the engine (outer diameter).
     
    Warloch, Dec 1, 2020
    #4
New Posts