Stripped Bolt Head Remover Sockets

I had to change a hub assembly on 2008 GMC Yukon XL. I watched a couple of you tube videos and it looked pretty straight forward. I removed the wheel, caliper and rotor. I was worried the axle nut (36mm) would be an issue. Impact did quick work of it. After spraying the 3 - 15mm hub bolts with liquid wrench I waited a day and went to work on them. I ended up stripping all 3 heads. I purchased the set below and was amazed at how well it worked. I was able to change the hub in under an hour.
IRISFLY 10 Pcs Bolt and Nut Remover Set Extractor Expansion Set

 

Looks to be reasonably priced.
Did they suffer any damage removing the stripped bolts? The Amazon description indicates that the material is aluminum, or perhaps maybe they mean that the the box they come in is aluminum...are they a "one time" use?


https://www.amazon.com/IRISFLY-Bolt-Grip-Extractor-Expansion/dp/B07D1XLZHL

 

I was actually impressed with the quality. The box is aluminum but the tool showed no damage at all and I was able to remove all 3 bolts that are supposed to be torqued to 133 ft # and rusty. I bought 3 new bolts along with the tool.

 

Put it on my Amazon wish list.

 

Craftsman made a nice set of those at one point. Not sure that's still the case. I think my set dates from the 90's and if I had to guess, likely Lisle was the manufacturer.