1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Koenig Top Id Cj3b?

Discussion in 'Early Jeep Restoration and Research' started by Arnold Layne, Oct 7, 2022.

  1. Oct 7, 2022
    Arnold Layne

    Arnold Layne Member

    Joined:
    Oct 6, 2013
    Messages:
    217
    I've got a '50 3a with a Koenig full top, it sits on the Jeep about right but the front edge of the top is about one inch too high on the windshield frame. The front edge is parallel with the drip rail but about an inch too high, like the door opening is a little too tall. Is it for a 3b maybe? If I can identify it the top is headed for the classifieds. Thanks
     
    Arnold Layne, Oct 7, 2022
    #1
  2. Oct 7, 2022
    oldtime

    oldtime oldtime

    St. Charles,...
    Joined:
    Aug 14, 2006
    Messages:
    3,486
    Koenig 3a and 3b tops are the exact same identical top.
    The only difference being the 3B version uses a small extra filler piece that is used on the door mounting frame.
    Maybe your windshield frame is not correctly adjusted ?
     
    oldtime, Oct 7, 2022
    #2
    Arnold Layne likes this.
  3. Oct 7, 2022
    Arnold Layne

    Arnold Layne Member

    Joined:
    Oct 6, 2013
    Messages:
    217
    Thank You. I'm pretty sure you are correct. I didn't think it would move that far out of whack but it looks like the windshield could move back just a hair and everything will be square.
     
    Arnold Layne, Oct 7, 2022
    #3
New Posts