1. Tip...
    When posting in Classifieds, you can choose from the following menu prefixes in the Thread Title: For Sale, WTB or Free.
    Click on the X to dismiss this notice.
    Dismiss Notice
  2. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

For Sale 225 Parts

Discussion in 'Early CJ-5 and CJ-6 Classifieds' started by wheelie, Apr 27, 2022.

  1. Apr 27, 2022
    wheelie

    wheelie beeg dummy 2021 Sponsor

    York, PA
    Joined:
    Mar 6, 2004
    Messages:
    4,143
    This engine came off a garage floor where it had been sitting for many years. Owner said it came out of his mother's '68 Commando. I took it apart and it appears to have suffered a head gasket failure as the #4 cylinder bore is very rusty as is the corresponding chamber in the head. So, let's go......

    Long block------free for pick up. I am not hauling this ANYWHERE but the scrap yard---scrapped

    Heads------complete less rocker assemblies and pedestals.....................20.00 each, pick up preferred----1 sold, 1 scrapped

    Rocker shafts with arms, etc..................................................15.00 each

    **** if you want the heads with the rocker stuff...................................50.00 for everything, prefer pick up

    intake.................................................................................................20.00--SPF



    distributor, unknown condition or brand.............................................................................30.00---SPF





    distributor hold down..............................................................5.00. SOLD



    fuel filter bracket...........SOLD.........................10.00




    fuel pump heat shield……SOLD..........15.00




    coil bracket............SOLD..................................10.00



    alternator mount/bracket............SOLD............40.00





    The following parts are being cleaned and will be available and pictured soon:

    Oil pan...........................................................20.00---SPF


    Timing cover with oil pump...............................60.00----SPF







    The dipstick and tube are damaged as are the valve covers. No exhaust manifolds. No carb.

    All prices are OBO and + shipping (USPS flat rate boxes when possible), where applicable, from 17322

    Thanks for looking.
     
    Last edited: Jun 26, 2022 at 7:45 AM
  2. Apr 27, 2022
    FinoCJ

    FinoCJ 1970 CJ5 Staff Member 2021 Sponsor 2020 Sponsor

    Bozeman, MT
    Joined:
    Jul 18, 2013
    Messages:
    4,501
    Sign me up for the fuel filter bracket and fuel pump heat shield.
     
  3. Apr 27, 2022
    Beach66Bum

    Beach66Bum 1966 Tuxedo Park Mark IV 2021 Sponsor 2020 Sponsor

    Big Island on...
    Joined:
    Oct 30, 2015
    Messages:
    1,351
    That was fast!
     
    FinoCJ likes this.
  4. Apr 27, 2022
    oldtime

    oldtime oldtime

    St. Charles,...
    Joined:
    Aug 14, 2006
    Messages:
    3,182
    I think I need an early style timing cover,
    Early Fits gasket on the left…[​IMG]
     
    Last edited: Apr 27, 2022
  5. Apr 27, 2022
    FinoCJ

    FinoCJ 1970 CJ5 Staff Member 2021 Sponsor 2020 Sponsor

    Bozeman, MT
    Joined:
    Jul 18, 2013
    Messages:
    4,501
    Someone in CA was selling them a month or so ago and I missed them by minutes...didn't think I'd see any pop up again anytime soon. If someone really needs these for true restoration type project, check in with me...I'd like them, and would use them, but don't 'need' them.
     
    Beach66Bum likes this.
  6. Apr 28, 2022
    BMoney

    BMoney Member

    Orange County, CA
    Joined:
    May 31, 2021
    Messages:
    56
    I am interested in the oil pan and intake. Any chance you would have the oil pickup that goes in the pan for sale too?
     
  7. Apr 28, 2022
    Rubicloak

    Rubicloak Member 2022 Sponsor 2021 Sponsor 2020 Sponsor

    Nevada
    Joined:
    Jul 19, 2018
    Messages:
    269
    Alternator bracket, coil bracket and distributor hold down please
     
  8. Apr 28, 2022
    wheelie

    wheelie beeg dummy 2021 Sponsor

    York, PA
    Joined:
    Mar 6, 2004
    Messages:
    4,143
    B money: yes, I have the pick up. It’s pretty gooey as it looks like some sort of additive was in the engine. It’s soaking in the tank now. I’ll let you know how it turns out. I will put you first for the intake and pan.

    Rubi: I’ll PM you with details on your parts after I check shipping. I’d expect a medium flat rate box will fill the bill.
     
    BMoney and Rubicloak like this.
  9. May 1, 2022
    BMoney

    BMoney Member

    Orange County, CA
    Joined:
    May 31, 2021
    Messages:
    56
    Sounds good, PM me when you are ready to ship out the intake and oil pan if the pickup doesn't turn out. Thanks.
     
    wheelie likes this.
  10. May 1, 2022
    oldtime

    oldtime oldtime

    St. Charles,...
    Joined:
    Aug 14, 2006
    Messages:
    3,182
    Dave, letting you know I’ll pass on the timing cover, I have one…and thanks for posting your stuff
     
    wheelie likes this.
  11. May 1, 2022
    wheelie

    wheelie beeg dummy 2021 Sponsor

    York, PA
    Joined:
    Mar 6, 2004
    Messages:
    4,143
    I'm a little behind on this stuff guys. Struggling with a rocker panel replacement on a Ford Focus. I will try to reserve time tonight and tomorrow for your parts. Thank you for your patience.
     
    BMoney and FinoCJ like this.
  12. May 1, 2022
    wheelie

    wheelie beeg dummy 2021 Sponsor

    York, PA
    Joined:
    Mar 6, 2004
    Messages:
    4,143
    BMoney: conversation starting

    James and Rubi, see conversations for shipping details.
     
  13. May 3, 2022
    wheelie

    wheelie beeg dummy 2021 Sponsor

    York, PA
    Joined:
    Mar 6, 2004
    Messages:
    4,143
    Timing cover still available (pics added). As well as other parts not marked as sold or pending.
     
    Last edited: May 3, 2022
  14. May 3, 2022
    wheelie

    wheelie beeg dummy 2021 Sponsor

    York, PA
    Joined:
    Mar 6, 2004
    Messages:
    4,143
    The rest of this engine is going to the junk yard saturday morning. Last call for unlisted items if there is something you want.

    Also have the vibration dampener plate (?) cleaned up and available for 20.00.
     
  15. May 4, 2022
    Joe Adams

    Joe Adams Member

    Connecticut
    Joined:
    Sep 11, 2016
    Messages:
    52
    Sending you a PM
     
  16. May 4, 2022
    jrsgoldenarm

    jrsgoldenarm New Member

    pinellas park fl
    Joined:
    Nov 22, 2019
    Messages:
    49
    Hi do you have the timing chain tensioner bolt?The one with the shoulder that the spring tensioner rides on if so I would be interested in that.Thanks
     
  17. May 4, 2022
    wheelie

    wheelie beeg dummy 2021 Sponsor

    York, PA
    Joined:
    Mar 6, 2004
    Messages:
    4,143
    Yep. I’ll get a picture of it later.
     
  18. May 4, 2022
    wheelie

    wheelie beeg dummy 2021 Sponsor

    York, PA
    Joined:
    Mar 6, 2004
    Messages:
    4,143
    BMoney, did you get the message I sent in Conversations?
     
  19. May 10, 2022
    Rubicloak

    Rubicloak Member 2022 Sponsor 2021 Sponsor 2020 Sponsor

    Nevada
    Joined:
    Jul 19, 2018
    Messages:
    269
    Got the parts. Very fast shipping. Thanks Dave
     
  20. May 16, 2022
    wheelie

    wheelie beeg dummy 2021 Sponsor

    York, PA
    Joined:
    Mar 6, 2004
    Messages:
    4,143
    Feel free to make offers on anything remaining.
     
New Posts