1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Military F-head

Discussion in 'Early CJ5 and CJ6 Tech' started by Kory S, Oct 4, 2021.

  1. Oct 4, 2021
    Kory S

    Kory S New Member

    Youngstown Oh
    Joined:
    May 28, 2019
    Messages:
    3
    Just purchased a so called military f head engine. Can someone ID differences between a regular and a military version? It has a 1 3/4” crank bolt and cast crank weights instead of bolted and welded crank weights.

    Thanks
     
  2. Oct 4, 2021
    PeteL

    PeteL If it wasn't for physics, and law enforcement... 2022 Sponsor 2021 Sponsor 2020 Sponsor

    Hills of NH
    Joined:
    Aug 3, 2003
    Messages:
    8,232
    For a start, different carb. Has a engine lifting loop over the center of the valve cover. Double groove crank pulley. Massive bulletproof fuel/vacuum pump with priming lever. Waterproof 24volt distributor. Bellhouse has threaded drain plug for u/w operation. Etc etc. But most of those identifiers are bolt-on.

    Possibly "MD" engine number prefix may be an indicator, if the block hasn't been milled.
     
    Last edited: Oct 4, 2021
New Posts