1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

It Arrived!

Discussion in 'The Tool Shed' started by Ayden, Jun 1, 2021.

  1. Jun 1, 2021
    Ayden

    Ayden Co-Caretaker of Family Jeeps

    Chesapeake, VA
    Joined:
    Feb 1, 2021
    Messages:
    21
    The railroad track anvil was way better that I thought and bigger. I did some beatin' and bangin' on it, and I did the hammer method. I definitely recommend this anvil for anyone that is looking for one. 20210601_153533.jpg 20210601_153617.jpg
     
    Ayden, Jun 1, 2021
    #1
    hudsonhawk and Fireball like this.
  2. Jun 1, 2021
    Alan28

    Alan28 Well-Known Member 2022 Sponsor

    Châtillon en...
    Joined:
    Oct 21, 2012
    Messages:
    2,327
    For sure a good idea, but rails are so heavy, there are some old ones near my place, but I cannot move even a small one!
    They put new ones and let the old ones here.
    They use giant grinders to cut them.
    rails.jpeg
     
    Alan28, Jun 1, 2021
    #2
    3b a runnin, duffer, Ol Fogie and 2 others like this.
  3. Jun 9, 2021
    Keys5a

    Keys5a Sponsor

    Florida Keys
    Joined:
    Jan 23, 2014
    Messages:
    4,188
    Thats a decent looking piece of rail. You will be much happier with that than the "anvil shaped piece of iron" from Harbor Freight or other seller of junk metal.
    I've got a couple 8" pieces of rail that are a lot more portable than my 129lb Hay-Budden.
    -Donny
     
    Keys5a, Jun 9, 2021
    #3
    Ayden likes this.
New Posts