1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Restoring Original F-134 Engine Mounts

Discussion in 'Early Jeep Restoration and Research' started by Mark T., Sep 8, 2020.

  1. Sep 8, 2020
    Mark T.

    Mark T. Member 2022 Sponsor

    Gilbert, AZ
    Joined:
    Nov 9, 2015
    Messages:
    160
    Having searched the threads I found lots of information about engine mounts and swapping motors but nothing on point.

    This has been an ongoing search for me to find a place that will vulcanize new rubber for my 58 CJ5 engine mounts. Alternatively If anyone has any ideas to keep the original engine mounts I am open to options. I bought a set of new mounts from Omix and they seem like junk. I will use them until I get the originals redone somehow.

    Any thoughts.
     
  2. Sep 8, 2020
    Bigdaddy13

    Bigdaddy13 Member

    So.Cal
    Joined:
    Nov 19, 2019
    Messages:
    556
    Mark T. likes this.
  3. Sep 8, 2020
    Mark T.

    Mark T. Member 2022 Sponsor

    Gilbert, AZ
    Joined:
    Nov 9, 2015
    Messages:
    160
    oh this is find for me. I'm calling now.
     
    Bigdaddy13 likes this.
  4. Sep 9, 2020
    Bigdaddy13

    Bigdaddy13 Member

    So.Cal
    Joined:
    Nov 19, 2019
    Messages:
    556
    Great! :)

    Hope you find what you need!
     
    Mark T. likes this.
  5. Sep 9, 2020
    47v6

    47v6 junk wrecker! 2023 Sponsor 2022 Sponsor

    USA
    Joined:
    Oct 25, 2006
    Messages:
    5,798
    Debella is good to work with.
     
    Mark T. likes this.
  6. Sep 10, 2020
    Greevesman

    Greevesman Member

    Napa, Ca
    Joined:
    Oct 12, 2014
    Messages:
    417
    Walcks is good also.
     
    Mark T. and dozerjim like this.
New Posts