1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

The Official "What The Heck Is This?" Thread

Discussion in 'Early CJ5 and CJ6 Tech' started by Focker, Feb 19, 2016.

  1. Feb 9, 2022
    kenb

    kenb Cleverly disguised as a responsible adult

    Detroit
    Joined:
    Jan 22, 2019
    Messages:
    550
  2. Mar 6, 2022
    Bulldog Shoaf

    Bulldog Shoaf New Member

    Alamogordo NM
    Joined:
    Sep 21, 2021
    Messages:
    13
    image.jpeg image.jpeg
    Baseline...67 CJ-6 with 225V6

    Here are two Qs, what is L shaped bracket for on the lower, drivers side of trans adapter supposed to be used for? Second Q....what is the part in the picture for? Not even sure it's for my CJ but was in a box of parts..
     
  3. Mar 6, 2022
    Twin2

    Twin2 not him 2022 Sponsor 2021 Sponsor 2020 Sponsor

    Virginia Beach, VA
    Joined:
    Apr 28, 2011
    Messages:
    5,160
    bracket on transmission . for front bearing support for PTO shaft
    now just guessing on second one . not for a V6 jeep . maybe oil filter bracket - does it have a cast number on it
     
  4. Mar 6, 2022
    Fireball

    Fireball Well-Known Member 2022 Sponsor 2021 Sponsor 2020 Sponsor

    Pullman, WA
    Joined:
    Feb 9, 2018
    Messages:
    3,823
    That second one reminds of Toyota Pickup Bellhousing to engine braces: https://www.ebay.com/itm/154387927819

    [​IMG]
     
  5. Mar 6, 2022
    PeteL

    PeteL If it wasn't for physics, and law enforcement... 2022 Sponsor 2021 Sponsor 2020 Sponsor

    Hills of NH
    Joined:
    Aug 3, 2003
    Messages:
    8,489
    My guess too.
     
  6. Mar 7, 2022
    Bulldog Shoaf

    Bulldog Shoaf New Member

    Alamogordo NM
    Joined:
    Sep 21, 2021
    Messages:
    13
    You guys rock, thanks for the info
     
  7. Mar 24, 2022
    Bulldog Shoaf

    Bulldog Shoaf New Member

    Alamogordo NM
    Joined:
    Sep 21, 2021
    Messages:
    13
    Here's another one, small circled bracket, drivers side of transmission.

    Thanks in advance. Jeep bracket.jpg
     
  8. Mar 24, 2022
    timgr

    timgr We stand on the shoulders of giants. 2022 Sponsor 2021 Sponsor 2020 Sponsor

    Medford Mass USA
    Joined:
    Aug 10, 2003
    Messages:
    23,496
    Year, model, equipment would help.
     
  9. Mar 24, 2022
    Bulldog Shoaf

    Bulldog Shoaf New Member

    Alamogordo NM
    Joined:
    Sep 21, 2021
    Messages:
    13
    67 CJ-6 w/ 225 and T-86
     
  10. Mar 24, 2022
    PeteL

    PeteL If it wasn't for physics, and law enforcement... 2022 Sponsor 2021 Sponsor 2020 Sponsor

    Hills of NH
    Joined:
    Aug 3, 2003
    Messages:
    8,489
    From squinting at the pic, it appears to mount the Stay Cable, plus having clips for two other cables, the e-brake possibly being one?
     
  11. Mar 24, 2022
    Bulldog Shoaf

    Bulldog Shoaf New Member

    Alamogordo NM
    Joined:
    Sep 21, 2021
    Messages:
    13
    @PeteL, Yes it is the stay cable, I'm talking about the little bracket which looks like it should hold two cables, don't think it's the brake based on the angle.

    Tom
     
  12. Mar 29, 2022
    48cj2a

    48cj2a http://bantamt3c.com

    Central Illinois
    Joined:
    May 4, 2003
    Messages:
    518
    In 67 they were still using lanterns for rock lights so it is where you hung your Rock Lantern
     
    Twin2, PeteL and Buildflycrash like this.
  13. Apr 12, 2022
    1970zeej5

    1970zeej5 New Member

    Texas
    Joined:
    Mar 10, 2020
    Messages:
    8
    1970 CJ5 w/ F134

    What is this threaded port above the fuel pump?

     
  14. Apr 12, 2022
    48cj2a

    48cj2a http://bantamt3c.com

    Central Illinois
    Joined:
    May 4, 2003
    Messages:
    518
    Breather going to PCV

    [​IMG]
     
    Ol Fogie and PeteL like this.
  15. Apr 12, 2022
    PeteL

    PeteL If it wasn't for physics, and law enforcement... 2022 Sponsor 2021 Sponsor 2020 Sponsor

    Hills of NH
    Joined:
    Aug 3, 2003
    Messages:
    8,489
    I think he may have been referencing the lower front corner of the exhaust manifold.
     
  16. Apr 12, 2022
    48cj2a

    48cj2a http://bantamt3c.com

    Central Illinois
    Joined:
    May 4, 2003
    Messages:
    518
    Your right I see that now. I'm at a loss...I've seen many different configurations on the Lhead intakes for ports but this is a first for an exhaust manifold
     
  17. Apr 12, 2022
    1967 CJ5A

    1967 CJ5A Mike 2022 Sponsor 2021 Sponsor 2020 Sponsor

    Raleigh, NC
    Joined:
    May 12, 2012
    Messages:
    690
    It is an air injection port for the smog system. Not many Jeeps were still getting F134s by the time smog systems were required, so you don't see that setup often.
     
    Ol Fogie likes this.
  18. Apr 17, 2022
    Buzzard

    Buzzard New Member

    Ventura County, CA
    Joined:
    Apr 1, 2022
    Messages:
    16
    This has probably been covered before but what are these two posts with the spherical ends on them? One is mounted to the frame and the other on the transfer case and they line up with each other.
     
  19. Apr 17, 2022
    kenb

    kenb Cleverly disguised as a responsible adult

    Detroit
    Joined:
    Jan 22, 2019
    Messages:
    550
    Clutch cross tube. Bellcrank where one end is attached to the clutch pedal and other end to clutch fork. This was superseded later by a jacketed cable on the V6 engine. Screenshot_20220417-111534_Drive.jpg
     
    Buzzard and Mark T. like this.
  20. Apr 17, 2022
    Buzzard

    Buzzard New Member

    Ventura County, CA
    Joined:
    Apr 1, 2022
    Messages:
    16
    Ahh okay that makes sense, thanks for the reply! My jeep has a hanging pedal assembly which makes sense why these aren’t being used
     
    jeepstar and Buildflycrash like this.
New Posts