This made my last install much easier that previous gear set-ups. A magnetic base and indicator are help full as well.
I have not hear of this but watching how the internals worked when I was testing, I can see this. I'll have to be gentle on for fwd/reverse
You are correct. .020" is the maximum. I used an indicator and stayed at .015". This made the install much easier.
I am using Moser axle shafts. I'll have more on the axles in a few days.
I’ve been kicking around in my head the idea of a selectable locker for my Rear Dana 44 for some time. There weren’t any good options for the...
I had my tub soda blasted. A little lower risk on warping. Was worth every penny I paid so I didn't have to deal with the mess. It did start to...
For the 2 hole knuckle swap I just finished, I used 2ea of ES62L and ES140R. I got my TRE's from NAPA I used 1" OD x .188" wall (.624" ID) DOM...
Here is what I use [img] [img]
Over the summer I did a 1 piece tie rod and tie rod flip an my D27 axle. Went to install my steering stabilizer and I'm running into clearance...
Was raining up north so decided to postpone the camping trip. Maybe next weekend. Gave me time to finish a few jeep projects Welded the cracked...
Looking for a D27 drive flange to bring with my trail spares. Thanks
Been working on the "62 getting ready for the HITR. Adding a winch. Welded the winch plate over the weekend. Painted it tonight. [img] [img]...
Just don't let your wife know!!
The hardware looks in the correct order to me. The silver spacers ride inside the ears of the caliper and allow the caliper to slide left and...
I used 1" OD x .188" wall (.624" ID) DOM tubing. .632" is the tap drill size for 11/16-18. .624" was close enough. No need to drill any larger....
For the 2 hole knuckle swap I just finished, I used 2ea of ES62L and ES140R. I got my TRE's from NAPA. Not enough time on them to know how they...
Driving into work this morning the steering feels so much better. My hands are much quieter on the steering wheel.
Finished up some steering upgrades. 2 hole steering knuckle and a tie rod flip. Used TMR tie rod end inserts [img] [img] One piece tie rod....
The FC-150 has a 7/8" shaft [img] [img]
The FC-150 part works with our CJ's. The FC-170 puts the ball on the passenger side
Separate names with a comma.