I just started using the 3M gasket adhesive that Marine shops carry....it's about 12.00 a tube, black and potent enough smell to knock you on the...
kaiserwillys also has them. Make sure if you're doing everything on both sides, replace your upper and lower kingpin bolts with fresh new grade 8...
Well, I've been having lots of problems with cold starting since my Jeep's been up and running (I've posted a few threads about it). After...
I'm in auto parts in general.
It does...it's on the list above, but keep in mind, you want an oil with roughly 1000-1400ppm of zinc or more. STP's 1/2 quart bottle has...
Also, keep in mind if the distributor cap is not marked #1 and someone didn't put #1 in it's stock location (which is facing towards the #1...
It is also available at AutoZone under GP Sorensen part number 96-142B. Price around me is 11.99. Just bought one for my Jeepster and my boat...
Royal Purple makes a break-in oil available too, but I have yet to see the actual testing results on the Zinc content. I'd imagine it's high. RP...
No. If the cam lobe is wiped...you're in for a new cam. But alas...it's a small block chevy and they cost like 5.00. ;) No really, but they are...
I figured I'd post this here just as a helpful tool, since most dwellers on here are flat tappet engine guys... Most people know about how the...
Yep just double check both valves are closed on TDC. The stroke will be right after the intake opens and closes. If the rotor was inbetween 1 and...
If it's 180 out, it will backfire through the carb and not even start. Pull #1 plug, have someone bump the engine over little by little with the...
If the valve seats are stock (if stock, they are actually part of the casting of the head), and have never been changed over to hardened seats in...
If you guys really want an awesome, spray in bedliner that works for frames, floors, everything...check out tcpglobal.com for U-POL raptor...
Hey guys, this is kinda a continuation of this thread, so I decided not to make a new one. I ended up getting the Jeep to run great but I'm still...
Yep...those would work! All you need is something that will clamp down and operate the cable. For someone who asked, the point of the valve is to...
Get a new master cylinder. They are only 40.00 and will save you headaches. Unfortunately, the wheel cylinders for these suckers are NOT cheap @...
That'll work! Any ideas on the heater valve though?
Any ideas on a replacement heater control valve? This one is seeping. It looks like the piston has a retainer that screws out, so maybe it's...
If no heaters were available on a 55, then I'm beginning to believe my Jeep is a franken-Jeep like everyone else! [IMG]
Separate names with a comma.