Not mine...
Just looking for a sanity check. I replaced the single mc on the 65. The old one had the cap seized on. Upon removal rust colored fluid dribbled...
Will the transmission crossmember that’s available from Kaiser willys work with a t14? It states t90. Also, for those that know, is the adapter...
Hi all, was looking at several near original jeeps and am unclear about if only the tower hump was painted black or all the removable pieces....
Will one of the new “Asian” t90 shift towers with cane fit onto a t86? Need a proper cane and at least to rebuild the detents in mine and thought...
Is anyone willing to dimension or trace out the stock bracket that bolts onto the throttle lever of a 2g on a dauntless? Most important would be...
1965 cj5 v6 with I assume a t86. Three speed anyways. In reverse, the cane will fall to neutral if you depress the clutch and are not physically...
Hi all, I am searching for stock style manifolds. Not for restoration, just wanting to go back to oem-like and ditch the fender well headers. What...
I’ve been lurking on the forum and adding a limiter for the dauntless motor mounts is mentioned. I see the gm kit from the 60’s and hot rodders,...
Would the rim off a postal have the appropriate 4-1/4 center bore or smaller? Just trying to avoid an eBay goat rope of trusting others to...
1965 cj5 stock brackets. Unknown donor high backs. I’m not the tallest person out there, but with these seats and my longer than average torso I’m...
Separate names with a comma.