So Timgr suggested this a couple of weeks back and I gave it a shot with no luck. Shifted wires clockwise rotated distributor counter, wouldn't...
Sorry Willys43 I screwed you up. It is the even bank, 2,4,6 that is not firing. I did try and manually feed the even bank with fuel but it didn't...
Not the plugs themselves but each of the three wires in question (1,3,5) as the engine is running and all have spark. I can have any or all of...
I remember seeing your post in researching for solutions. I did try pouring some fuel into the carb on that side with no noticeable improvement....
Thanks much Norcal, great info and probably the exact source of my problem. I do want to go with Pertronix when its all in and good. Did I read...
So my distributor has no numbers on it at all. It does have a ink stamp for a remanuf but that is it. Could this be the whole problem? I do...
Thanks for the pics Fireball! So I am starting to suspect the distributor "body", and here's why, tell me what you think. My current cap is not...
And where is #1 cylinder in relationship to the front? Do you have access to the points adjust window in this position?
how about this picture?
yes I have the rotor with the wide tip. Do the two pictures that I included at the beginning of the thread show up? I only ask this because they...
Scott, I had read your post on that situation and checked it out. Unfortunately it did not solve my problem but it was good input. I do have a...
Ok so I tried your recommendation and moved all wires one post "clockwise" and rotated the distributor the opposite direction, vacuum module away...
Looks like I, by just dumb luck, chose the right group to join. So far nothing but great advice and respectful people.
Thanks guys. Yes as far as distributors, if I'm not mistaken, the Delco/Remy has the j hook hold downs and the Prestolite has the spring clips...
OK everyone, even though I am very new to the "Forum World" Its pretty obvious that this "odd fire trouble" is probably THE most frequently asked...
Just to finish off the thread, I bolted on the Remy 25236 yesterday and it spins up perfect. No shimming was necessary for the 1/8" clearance and...
I know Jeep solutions. It was actually the owner who said that he remembered having issues with starters on his 225's. I'm hoping its a non issue.
I have Haps (a great old school shop, thanks Bearskin) bringing me in a Remy 25236 on Monday. That cross references to that 1107391. She has...
Thanks for the info guys. I was surprised too to hear that this starter "in their opinion" was so rare. I will cross reference that number for...
So the starter on my '69 CJ project just jumped to the head of the line. Pulled it to fine a broken tooth on the starter. After talking to some...
Separate names with a comma.