Hi Everybody! I’ve had this cooling problem since I bought this jeep…takes forever to warm up to operating temp. If it’s nice and sunny, 75* I’ll...
This is mine. https://slo.craigslist.org/cto/d/los-osos-1969-cj5/7694443795.html This is not the price for this group, Especially not when this...
So I ditched my Swiss cheese soft top but kept the doors. The plastic windows are not very clear. Anybody had any success bringing them back to a...
[ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] Don’t know if this junk has any value or it’s condition other than what’s visible....
Howdy Everybody! Since the D18 rebuild, things have been progressively improving. $ are tight this summer so just little piddly (inexpensive)...
https://slo.craigslist.org/cto/d/oceano-170-willys-military-jeep-obo/7654046769.html I don’t know anything about these. CJ6 predecessor?
[ATTACH] [ATTACH] Hi everybody! This is the back seat in my ‘69. Don’t know if it’s aftermarket or homemade? It is supported by some angle iron...
This is a 1 1/4” shaft large hole from a 69 CJ. It was running fine on Saturday, but surely needs a rebuild. has all single stick linkages and...
[ATTACH] So I’ve got my endplay perfect but without any speedo components (tc I sourced had a plug, no driven gear). My plan is to seal up the...
[ATTACH] [ATTACH] Front bearing cap with single stick setup. Housing and shift rods have been cleaned and de greased (not thoroughly), shift...
Feeling around for a front shaft for a ‘69 V6. D18/D27. Don’t care about u joints, I can replace those just looking for a shaft that doesn’t have...
[ATTACH] Hi All! Got my D18 rebuild kit from Novak today. Almost ready to get going. I think this is my last hang up. How do I remove the pilot...
[ATTACH] Hi everybody! This is my wife’s Element. She loves this car. We bought it brand new back in 04’. It brought our daughter home from the...
Good afternoon everybody! Trying to complete my front corner project. Disc brakes, 2 hole knuckle and more. I’m down to caster shims and...
Hi everybody! @Cj5dale ’s body work thread was timely for me as I had the same questions. With the replies to his thread I think I will go the...
Good morning everyone! With my 2 hole knuckle conversion and intermediate Saginaw manual steering, I’m having a tough time finding tie rods....
[ATTACH] [ATTACH] Good morning everyone! Not specifically an early CJ question but here goes. How can I keep the rust from blossoming on this...
[ATTACH] Good evening everyone! I hesitated about starting a build thread, mostly because I don’t have a build in mind and because whatever I do,...
Good morning all! For you guys that have done the Brennan’s tracker disc conversion, what kind of pads are you seeing your best results? I...
Happy Friday everyone! Recently replaced my timing set, had oil pump woes etc… All clear now, well almost… She is starting really hard,...
Separate names with a comma.