1, is your hazard light switch. 2, The mushroom is a vibration dampner for when the spare tire was mounted there.
Maybe classifieds don’t count?
And did a fine job of it too!
Looking at it again, it is definitely an oil leak waiting to happen. Stud with jb weld would probably remove that likelihood, at least it seems...
I don’t know if you’re off base or not. Once you’re done it’s not going to be a bolt you are constantly or even often removing and replacing but I...
Dana 18 output seal, National 450185 is what I used thanks to info gleaned from this forum! I think I told you guys that I honked up the rear seal...
[ATTACH] Just got this one from Play Dead.
We need pics just in case I get down 5 cities way, then I will know who you are. Also, Fresbone gets over to Pismo a few times a year.
Not yet.
How much do you want to spend? These aren’t mine but are in my AO. I could house them for you till you get here....
Funny, I just talked with another member about this. I have an intermediate from a different member that I will let go. Pm me with a text number...
I have a nice intermediate speedo I bought from a member here a while back. I was saving it fort when I re wire but I think I will be going with a...
Where were the leaks, other than the drain plugs? Pan and speedo cable are common. Front and rear caps need to use thread sealer on the bolts. I’m...
A real Navy SEAL will be the opposite of a vegan, they are not going to make sure you know. We had a Vietnam 2 tour vet in our regular high power...
How about the xfer case mount/vibration dampener on the pass side?
Sounds like you may be in business jeepstar!
Ouch! Might as well get anew timing set since you’re gonna be in there.
First, I believe the forum rules say that you are required to post a price for your items. Second, I want those wheels! I think shipping will...
An uneducated guess would be the charge light in the cluster. Although it should be insulated. Maybe corrosion? Has @jeepstar been under the dash...
I would guess more likely a ground in that wire but I would check for voltage before switching your meter to ohms. Then you won’t blow a fuse in...
Separate names with a comma.