Hey All! My Jeep makes a decent clank / clang / clunk if I engage or disengage the clutch too quickly. I have a buick 231 with a BOP...
Thanks Jw60, I just bought those :)
JW60, Where did you find those generic pucks for that price? When I start taking the old mounts out I will see what size holes are available....
Hey All! I bought a set of Energy Suspension PN: 2.4101G body mounts. The bolts holding the body of my Jeep to the Chassis appear to be mostly...
If the radiator is still in place, be careful when prying on the pulley. They tend to "pop off" when the paint and grime finally release... mine...
Norton, There are Jeep specific salvage yards scattered around the country as well. We have one here in San Diego called Hard Rock 4X4. You can...
When do you feel it? Does it increase with RPM? Does it increase with speed? Does it go away? Have you ran it without the belt on it? The...
How bad of a vibration would the wrong flywheel have? I imagine that the vibration would be pretty violent. The vibration I am dealing with is...
Rich, The vibration was not there before we sent the Jeep out to be restored. We didn't get any documentation from the restoration shop, so I...
One more of Harmonic Balancer and the crank pulley that was on the engine (probably NOT original). [ATTACH]
Keys5a, The engine swap was performed by a mechanic in 1990 along with a lot of poorly done "upgrades". The engine was rebuilt by Densmore...
I guess I am just a little surprised that NAPA auto parts, O'rielly Auto and Dorman all got this wrong, or are there multiple flavors of harmonic...
Hey All! I have been dealing with an engine vibration and think it might be the harmonic balancer. My engine is a 231 Even Fire Buick, casting...
So glad I read this! I didn't know there was supposed to be insulation under the tank... no wonder mine makes so much noise! What are you all...
I am running Blue Star M+S 7.5x16 tires and have been fairly happy with the tires. They are HEAVY. I had to add some additional support behind...
Might be a stupid question, but the Amazon description for the Hella 002395801 kit is 165mm which is about 6.5". Any issue, or should I just...
Fireball, My Jeep is currently at MIT Drivetrain in El Cajon, CA getting worked on. It looks like the bellhousing you pointed me to on Ebay was...
Scubabug, I found a 5/8-18 male inverted flare to -06 male JIC/AN fitting in my garage, which should fit one of the ports on your Ford box. I...
What kind of fittings are on those Ford pumps? We have fittings up the whazoo at the shop I work at. Converting to a -6 AN or JIC fitting would...
I am in Vista, but the T-90/D18 combo isn't mine. I have been tempted to buy them, but my wife would kill me! Haha, I know what you mean about...
Separate names with a comma.