Got the last of the parts in today to finish the overhaul of my T90. When test fitting the blocking rings into the new synchro hub, they are way...
That's not OMIX. My T150 pops out of 1st gear on decel. I pulled the top cover and before pulling it fully off I tilted it up just enough to...
So yesterday I took the CJ2 (46ish) to pick up my daughter from school and also had my son with me. We were going to go by the park, so they...
Is there not a grease seal in the bell to keep grease from migrating down the axle tube? Or is it just the inner seal to keep 90w out of the tube...
Sunday morning I'll be making a trek to Oklahoma to look at a 1950 CJ3A. Owner claims to have put a lot of new parts on and switched to a 12V...
Previous owners put a Mallory HEI type distributor in at some point in the past. I'm wanting to go to a more stock style distributor. Are...
I have a stock height 76 CJ5. I've added Old Man Emu shocks up front but can't find any specific rears. Does anyone know the stock rear shock...
I've got a CJ5 here I'm working on for someone else. The Carb was supposedly reubilt by an unknown shop and it's missing parts. Float, flat...
Did they come with recovery hooks from the factory? If so where were they mounted? I currently have none and have a set to add but I'm going to...
SO before I did the full tear down and rebuilt of my CJ the power steering worked VERY well. It just leaked out of the reservoir and pump shaft...
Looking to get a receiver hitch for my CJ5, I need to be able to pull a small light trailer with max weight of about 2k lbs for moving hay other...
Alright got my CJ mostly painted at this point but i did notice a few dark spots where the paint is a little thin. I didnt notice this till well...
So i mucked up the original pinion when cutting off the yoke and have to drop in a new gear set. Probably for the best as I found the ring gear...
Is there anything past pulling the pinion nut to getting it off? I spent 4 hours trying to pull it today and busted 3 pullers in the process. All...
Looking for parts for the shift turret or shifter top or whatever the technical term for it is. I can find parts for the T170 like in the link...
76 304 V8. One of the pipes on this is broken at the base. Seeing if I can get a new one but I'm not sure what it's called, or if I'm going to...
Got my T150 torn down. I tore it down because it would pop out of 1st gear when under any torque unless you held the shifter down in 1st and I...
My original steering shelf is worn to the point of the ujoint up to having about an 1/8 inch play in all axis and it had the plunger style...
Any preferred brands? I ordered the ATP from Rock Auto and the ID is too small, around .030 smaller than the flywheel, I have been unable to...
1)I've got some 16 gauge sheet metal laying around from another project. Would this be ok for patching parts of the body? This Jeep is going to...
Separate names with a comma.