The wiper motor on my 1970 CJ5 is original but doesn't work because the brushes are bad. There is no manufacturer's ID information anywhere on...
I have the chance to buy these for $30 each, but don't know if they are worth it. Any help guys?
Plan to pull the pitman arm off of the ross box tomorrow. Never done one before. Heat and a pickle fork? Dauntless. Any advice?
Is there any use for a dauntless single barrel intake with Rochester B carburetor?
I just rebuilt the Rochester 2g on my dauntless. Replaced everything. Now it doesn't want to run unless the choke is nearly full on. Other...
Does anyone have any idea what this speedometer is from? It has a light for "brake" along with the normal amp, oil, and high beam. It also has...
I currently run my dauntless with its stock dizzy and points. I've decided to change to a Delco with Petronix. Do I install it just as I...
I run a stock dauntless with the 2G carb. Every time I go to start it, I have to crank it over for 5 - 10 seconds before the accelerator pumps and...
I'm diagnosing a dauntless that runs rough. I pulled the plugs and found the electrodes on the ends are red on one head. Has anyone seen this...
Does anyone have a wiring diagram for a 67 cj? I have the FSM, But it doesn't show what color wire goes where. The light switch and terminal...
My 67 CJ5 Dauntless would not start yesterday and I spent yesterday and today trying to understand why not. It had never had any starting issues...
I just got a 67 cj5 with a Bumper I'm not familiar with. It is curved and factory riveted on. It is made of the same heavy thick steel as the...
[ATTACH] These were in a box of parts I got with my project CJ. Can someone tell me where they go on. They do not go on my 67, I believe. Thanks
So, I bought this cj with dauntless and t90c. I have an extra t14. What all do I need to get the t14 installed. Thanks for any advice on the...
I have a 69 cj5 with the 225 and with a crack in the block. I have a fully built complete 231 from a 79-80 Buick century. It has a thick...
Is there a source for purchasing fly weights for the dauntless delco distributor?
Separate names with a comma.