Looking for a usable cj2a frame preferably one before they switched to the 3a style . I'm in Florida but willing to travel if not to far.(weekend...
Update just got around to rebuilding the carb.Installed the carb and put all new gas in the tank and got it fire up and running but not well still...
I have installed Pertronix on it about a year or so ago.
Ok thanks will do the carb first.Because I already have a rebuild kit and see what happens and go from there.Will also check the pcv valve.Will...
[ATTACH] [ATTACH] This is on a 1966 dauntless the Jeep seem to run good but it sat for a month and when I started it now it won't idle and I have...
Mine was broke when I went and changed my timing chain.It took a while to fined one no one sales them.I called around junk yards all over. Call...
I first hit them with 320 wet sandpaper the various grits of Scotch bright and flitz polishhttps://photos.app.goo.gl/Zb29kYkXKevGujkM7
Picked up a few parts this weekend for the Tuxedo.[ATTACH]
Wanted to thank all for the help.Went out to jeep this morning to start troubleshooting.Hooked up the battery and I tried the lights they came on...
ok I was installing a oil pressure gauge.So I removed the alternator to get better access to install oil pressure line.So here is the stupid part...
no I don't.I have one right behind the thermostat housing that one is big enough but the heater hose goes there.And where the original electric...
hi I'm installing a autometer mechanical temperature gauge in my 225 with a stock intake manifold.My problem is where to install sending unit?I...
ok thank you I have 3.73 gears so I will have to keep looking.Thanks
are these #'s powr-lok 23209x 1-24-63 C and 23209x 2-15-67 A.If so what gears and spline count?Any help would be appreciated Thks
The one in the picture is the one I have.It doesn't look right because one of the ears covers the wires that run along side the valve cover...
yes I looked at those pictures.mine had to be there on the intake under the oil bath because there is a threaded stud there and the wires ended...
does anyone have a picture of what the ignition coil bracket looks like on a 1966 dauntless?Does it have one or two holes?And does it mount on the...
Well he would separate so I wondering how much of it I would have to buy.Sounds like it would be easiest to try and buy the whole things...
I found this setup but was told it came out of a Scout.I have the dauntless v6 with the t86 trans and t18 transfer case.The other setup I'm...
Thanks looked up the part # found one nos $95.00 wow. Any other options? I already have the new timing chain but it’s not the double roller.Thanks
Separate names with a comma.