I just installed a Luk in my 72 with 304/T15. Went in easily (as easily as removing and re- installing a transmission can be). Only gripe I have...
Got rebuilt T15/D20 assembly back in place. New windshield cowl gasket will hopefully eliminate the annoying unlatching-latch issue. Lights are...
The 74 TSM has my switch in there! I had the terminals ID’d correctly, which is good, but I still have front brake lights. I’ll dig deeper this...
I have a 72 TSM, and I didn’t know that was back there. :( I just tried it, but my switch must be wired differently (bought separately). Rear...
I hate to ask, but I’m at my wit’s end. I’ve spent 4 evenings with a multimeter trying to get my lights working correctly. I had everything...
Got the clutch installed and put in a new windshield gasket while waiting for RTV to set up between tranny and t-case. Get those put in tomorrow.
Front parking lights blinked with the blinker on, but stayed on when the lights were on. Swapped the input wires to the lamp and fixed it. Also...
Great night! After 3 evenings of staring at wiring diagrams and scratching my head, I got all the lights and turn signals functioning. Reverse,...
Not just today... Dropped T15/D20 and rebuilt T15 (D20 was last year’s project). After trying to “press” bearings in with sockets and a BFH, I...
Dropped my T15/Dana 20. If you’re wondering, yes you do need to remove the floor cover panel and take off the transmission top cover as directed...
Installed a new water pump. Old one worked fine, but my 72 304 has the odd-ball length pulley shaft. The P.O. put in a whole new cooling system...
Dropped fuel tank and replaced sending unit. Hooray for working gas gauge! Wrapped up leak-down test. It’s not looking good. One cylinder lost...
Yeah, it’s a short one. The tall one looks scary! Pretty sure I’d drop something on my head.
I’m just down the road in Katy and bought a HF transmission jack last year for my D20 rebuild. You’re welcome to borrow it. Your builds are...
I rebuilt my Dana 20 last spring. I used the Novak kit. The reviews were great, but I thought the directions were lacking in some parts. I found...
Did mine last year - also a 72 with D20 on a T15. The gasket is the “Texas” pattern. Getting to the bolt I called “Texarkana” was the main issue...
I love my CMP FrankenGarand. I’m sure you’ll enjoy your Jeep just as much or more. Better to be on the road than sitting around waiting on...
I rebuilt my Dana 20 this spring, and it was lots of trial and error. I started with a stack that matched what I took off, torqued, checked...
Separate names with a comma.