angel I am afraid daryl is correct. pull valve cover and you will see a lifter not lifting to its full height. I had the same misfortune with...
maybe you should reinstall the rocker assemblies and cycle the oil pump to verify oil is getting to all parts. running engine without confirming...
As a certified welder and current structural steel and welding inspector here in los angeles, I can say without reservation that the welding on...
late to say thanks for info and clarification. now i can button it up without any reservations. this really a great site!
in a bit of a panic as i am getting ready to button up the 225 after a new camshaft install when i come across a thread showing a camshaft...
If you took say a 3/4 turnbuckle and some cable with clamps or cable chokers and hooked them at the corners of the long dimension, it would be a...
hey matt a good way to look for cracks is to get the suspect area super clean, then apply some baby oil in the area. wipe it clean then...
hey worman a tip of the cap on that design! that is a thing of beauty.
i get a loud whining noise when i need any parts for my jeep. luckily its only my wife!
no doubt the radiator. have a shop take off the top and bottom reservoirs and rod and boil out the core if it can be saved, if not they can put in...
hey cj-jim preperation is everything! use fresh 7018 rod. remove all paint, scale and grease. don't bother with grinding a bevel, the...
hey jayhawkclint what is the thickness of the material you are cutting. if you are using the magnetic drill, material less than 3/8 does'nt...
thanks gents. i like the n.o.s. except the price. will mull it over some before commiting
the speedometer in my '66 cj5 gave up the ghost last week(frozen drive) and looking for a n.o.s. speedo but no luck. lots of omix units for sale...
hey rozcoking23 don't sweat the bolts for the bumper attachment, per american institute of steel construction the bolt only needs to be...
hey cj joe oustanding fab job ! regarding single stick shifter, if you can't reach the t. c. shifter why not weld on an extension? regarding...
hey 1fastsedan dig the build, the wheels and meats look good too! just for future reference, whala actually spells VOILA. its a french thing.
i've got the v-6 in my '66 and find it to be plenty of power. if they are both in good shape get both. it's never too late to have a happy second...
check out dutchman. don't have a number but should be easy to find.
hey jeeppower i agree with you that a cutoff wheel can do the job. you clearly have a good eye and steady hand. however, i must take umbrage with...
Separate names with a comma.