I already have a GM alternator adapted to my Kubota
Im definitely considering this on my CJ-6/Kubota swap project. I was thinking of using an electric vacuum pump like the one on my 7.3L PSD with a...
After taking the Dana 18 completely apart I sourced a Dana 20 to rob the case off of. I then set about cleaning everything up and putting it all...
I found a Ford T18 with the 6:1 first gear and correct SBF bell housing. It came with the clutch and flywheel as well but wasn't able to use them...
For some stupid reason imgur won't let me link over vertical pictures so I'm missing quite a few from this phase. While my son was on spring...
For some reason somebody had installed 60's Ford Fairlane taillights into this CJ6 tub. I have no idea why but they were an eye sore IMHO and had...
I'll group the next few posts by what was accomplished, so they'll be a bit jumbled timeline wise. I finally got around to getting the Kubota...
Its been a long time but I'm still working on this thing. I've since moved into a new house, further built and then sold the XJ, and even got...
Hey Wheelie, bringing your thread back from the dead here but I just used the heck out of it as a reference for converting my Ford T18 to accept a...
This primer is supposed to work pretty well, my buddy who sprayed it on for me has used it on several projects of his own. That said, it will be...
I was finally able to get the time for my buddy Steve to come over and spray some PPG Red Oxide primer onto the CJ6 tub, hood, and fenders. Now I...
T18/T98a hybrid of sorts. T-case will be a D18 inside a D20 case.
So the CJ6 tub I got is a 72-75 era one. That will make upgrades like hanging pedals and a worthwhile heater a lot easier, although I do kind of...
So this followed me home today. 1970ish CJ6 tub sand blasted and in very good condition. Has the fenders and the hood too. No grill, dash,...
Yeah, V2203 DI. I’ll be adding a turbo and putting a T98 behind it using Overland Diesel kits.
This guy followed me home today, just another piece of the puzzle coming together for my build plans. [img] [img] [img] [img]
No pictures but I did pick up a Wagoneer passenger offset D44 rear axle for $100 this morning. Now I'm on the lookout for a matching front. Once...
Thanks, I wish I could take full credit but it was a kit. I made a few tweaks but its mostly as designed.
Forgot to show off my new 1/2" dimple die, used it to make small tie-in plates for the A-Pillars to the inner fender/cowl [img]
Today I was able to get the cage bolted back onto the XJ and weld the A-pillars to the sliders. Then with the help of my friend Steve we got the...
Separate names with a comma.