The Jeep has a 2-2.5 inch lift, so not much lift really since the original springs were worn out. I should check the spring bushings, any...
The tires are in good shape, fairly new and no noise from them. I kind of thought the caster was just for the steering wheel centering itself back...
Ok, so the tie rod ends do adjust in an out. I should turn them each equal amounts correct? Maybe try one rotation on each side and re measure?...
Its not death wobble, I have seen that before. It more just likes to wander at higher speeds.
Hey everyone, I think I need to set my toe adjustment in slightly on my 75 cj5. It gets a little wondery at speeds higher that 45 or so. Nothing...
Yes oe style Motorola alt. The one that was one there that burnt up was probably 8 years or so.
Are you running the disconnect on the ground side? Doesn't the alt. have power at all times since the wire runs from the battery to solenoid then...
Thanks for the help, I was never good at electrical wiring diagrams.
Ok did a little more digging in the wiring, its not to hacked up compared to my fsm surprisingly. The inside of the alt you can see wires that use...
I have a fsm, guess I'll have to dig in. That blue wire comunc off the starter solenoid turns into that red one that goes down to the alt. So that...
Ok so, first pictures shows what I think is the voltage regulator. Second picture shows where someone has spliced 2 pieces of wire together...
[ATTACH]
[ATTACH] [ATTACH] [ATTACH]
Yes, I will probably install one.
It does have an external voltage regulator, not sure how to test to see if that is ok?
Hey everyone, went out to start my jeep( 75 cj5 304) and the battery was dead. I check the battery with my volt meter and it didn't even show 1...
THanks, finally got it on
Hello, working on my 75 Cj5, I have it all back together from replacing the steering box. When I go to tighten up the drag link to the pitman arm...
Holley 1850-4 I believe. I restarted the adjusting on the carb starting from " factory" and redid the 2 idle circuit screws and adjusting the idle...
The intake and carb were already on it when I bought the Jeep a little over 10 years ago
Separate names with a comma.