Hi all, I am rebuilding the Dana 18 and I have it all put back together EXCEPT for the rear bearing cap. I cannot get any play out of the shaft to...
I have a dual action fuel pump with the glass on top and vacuum ports. I plan on keeping it in my stash but am having trouble locating the correct...
Is anyone aware of any advantages of using an analog ohm meter over a digital ohm meter or vice versa?
I have a temperature sending unit on my CJ5 that came with a sending unit like the one at this link on Ebay. Jeep, Willys M38 Dodge M37 NOS Early...
Having searched the threads I found lots of information about engine mounts and swapping motors but nothing on point. This has been an ongoing...
So my dash looks like Bubba was hungry for swiss cheese a few times and mounted just about everything he could find. Naturally he had to drill a...
I've got a spare wheel mount that has been pushed, hammered or other wise bent away from the bolt holes it protrudes through. I have been able to...
Been a while but I am back to building the Jeep. My Jeep came without an alternator or a generator. Is there a way for me to tell whether it came...
Putting stuff back together now and my FSM calls for Spicer type U-joints on the ends of the drive shafts but I don't see a size or part number...
So I'm not ready yet but I am keeping my eye out for a Warn winch to mount once the jeep is back together. I have been wondering whether the Warn...
So I'm built up to where now I need to replace the horribly deteriorated engine and transmission mounts. Are the ones sold by Omix as good as any...
Alright my wife says sometimes I am dumb as a box of rocks, and I might be this time too but after trying to find it in the FSM I have or follow...
My first build here so there is lots to learn. I found this CJ5 out here in the desert southwest near Coolidge, AZ. Not much rust on it but it has...
Separate names with a comma.