The large center bolt on the grill bottom is tight but the grill still pivots, which will stop when its attach to the fenders and rods. Is this...
My rods are identical but look like they will hook right up. threaded on one end and slight bend on the firewall end just so the bolt lays flat.
Oh I do have those just didn't know they were for. why is one side lower? (I am expecting someone to answer because the other side is higher, lol)
My collection of fasteners included in my basket case is getting low. On the second reassembly after the timing chain some dope timed it 180 off....
Item one-the oil bath...it looks fine, just a little dirty and grimy...I cleaned it somewhat with a parts washer but since its a sealed unit, is...
Hunting season is coming up again and I need to get back on the old jeep. In reinstalling the timing cover oil pump, do I hog the whole area...
okay, the broken bit is out, broken bolt is out, threads are cleaned up and its ready to go back in...will any parts fall out of that oil pump...
okay so in reinstalling this timing chain cover (68 oddfire) I notice that I have more holes than bolts from when I took it off. I see there are...
ok the old seal popped right out and the new right in. Fresh out of warm maggots so where do I pack the vaseline at, right in the pick...
Hunting season is near so somebody needs to quit screwing around and get this jeep back together. First thing, the new seal for the timing cover...
ahh its a 12 and 6er not a twelve and twelver...no book.
I trying to line up the timing gears to both at 12 for TDC before I reinstall the cover, they don't seem to line up. more like a 12 and 11:30....
I just replaced the timing gear set on the 68 225 oddfire. The spec I found on the tork said 40-55 lbs. That seems like a pretty wide range. Is...
Thanks comrades. have it all ordered
Any suggestions on where to order new timing gear set? Locally O'Reilly, Napa and AutoZone don't have. I just need a basic set. Thanks
In mt search for parts of the fuel pump, I come across this. The timing chain tensioner is touching the chain, but not really doing much. In the...
Since my cj would not pump its own fuel, I decided to pull the pump off and replace it. Upon removal I notice part of it missing. Any ideas on...
Is there a section on fine tuning the 2G manual choke small orifice carb? Thanks
do you think the synthetic is better or a waste of $$$$$
Perhaps a little airline size bottle of Black Jack
Separate names with a comma.