I'm having trouble with my engine starting after I run it to operating temperature and then let it sit for longer than 10 minutes. If I try to...
Pulled my old cam out this weekend. Suspected something was going on. I have attached a couple pics of worn cam lobes. I know it will affect...
My 225 starts fine when its cold, but after its up to temp you really have to crank it over for like 5 to 10 seconds to get it to start. If you...
I just replaced my stock 35 amp motorola alternator with a 10SI. Just wondering, I had two wires connected to the output terminal on the motorola....
Installed new skyjacker 2 inch lift springs. Now my front tires are severely toed in. How difficult is it to straighten them out without taking it...
Ok, I just installed an adjustable vacuum advance on my GM HEI distributor. I can't seem to get it below 45 degrees at 3000 rpm. Backed out the...
Just picked up an electric fan at U auto pullit and was wondering if anyone knows what size relay will suffice to run the power through. Also, who...
I know this isn't real technical, but does anyone run their supertop with the rear windows out? I'm wanting to run mine in summer without...
I'm still trying to figure out why my cap doesn't match my distributor body. Had to renotch the cap to get everything to line up. The distributor...
Picked up a 73 this weekend and have been assessing what's got to be done to it. Found that the transmission and transfer case had no oil, just...
Ok, I've got a question. My 225 has a 2g rochester, rebuilt it back in the summer. Been running really well. Couple weeks ago we had our coldest...
I know this has been covered in length, but I can't seem to find the answers I'm looking for with the search function. I pulled my points...
I ordered a new bestop supertop and was wondering if anyone had any issues with using the original windshield channel. Mine has what looks to be...
I'm having carb trouble also. Except mine is an idle issue. I just disassembled my carb and from what I gather the larger ball for the...
Anybody ever used roll in bed liner made by midwest chemical? Its called grizzly grip and comes I about 15 different colors. Just wondering I'd...
Anyone know the correct way to install the key in the rear hubs on a dana 44. Just want to make sure I haven't done it wrong. Thanks in advance
I've got a dana 44 rearend 66. Just wondering if anyone has ever pulled the axles without removing the hubs. If is even possible. Posted via...
I'm not too versed on axles and their technicalities, so maybe someone can help me out. I've got a 66 CJ5 and just noticed that the rear tire seem...
My question is, I'm doing a transmission swap going back stock from a T85 to a T86. The T86 is 1.5 inches shorter than the T85. This put my...
Does anyone have a T86 laying around they could measure or no off the top of their head, what the length of a T86 is from front to back not...
Separate names with a comma.