I've already rebuilt the steering box and drag link. I've also put new inner and outer tie rods. It still has a bad shudder/shimmy once its up...
Thanks for the help everyone. Points were bad. The only way it could've been any worse is if the arm was broken off.
Choke has been converted to a manual set up. I checked to see if there was any play and its nice and tight, no way it could be closing up.
Stock ignition with Rochester 2GC. It has the manual fuel pump that is a new unit with 200 miles.
225 V6 runs perfect most of the time. A new intermittent problem that makes periods of driving stressful. It is schizo between lights some days....
Wiring is a new kit from Walcks, which is worth 10x its weight in gold for someone like me. It is a new headlight switch but it is Omix-Ada junk...
All of the cluster lights were on regardless of whether or not the dimmer was adjusted or the switch being on. Nothing shut them off besides...
Yeah, it has a hot wire from the switch to ignition. I believe it is hooked to the battery terminal on the ignition switch. Which I guess if it...
Found what I believe the issue is for the headlight switch wiring but I'm not quite sure how to fix it. Noticed in the corner of the odometer a...
Alright. Finally got some time today to mess with it. I started completely over. Turns out I had the ignition switch wired up incorrectly....
Yessir, that is my basis for the idea of the battery being dead. Messing with it this evening has brought up another issue. Lights are dim, even...
Alt light is illuminated while cranking, then goes out after fire up.
Belt is new and tight. Electrical systems aren't that high up on my competency list so over explaining that stuff would help me out. So I've got...
I had the alternator and starter checked this morning. Both passed the the test multiple times. I went ahead and picked up a new voltage...
Its a reman motorola with the external voltage regulator.
1967 CJ5 with the 225 t90 2gc setup. Issue is that after driving for more than 20 mins or so, it will not fire back up. I get the fast clicking...
Throttle plates are closed fully
Rebuilt the carb this weekend. It had some sort of funk all over the inside of it. I cleaned, put back together, and put back on. It fired...
It had been sitting for a few weeks so I imagine that is the main issue. I'll check out the star fighter, I'm not using that gas station again.
I can get some pictures of the linkage tomorrow. It was running okay with the choke pieces removed, so I doubt that is causing me any issues now...
Separate names with a comma.