Thanks for the info, guys. Called around to every autoglass installer in Lancaster County and none of them would touch it , " Sir this car is too...
My 56 cj-5 is painted and ready for assembly. I dug out the windshield and found a huge chip in it. Can anyone recomend a source for a new...
Thanks for the info. I have decided to do it. As stated, all custom. It should be fun.
I am in the middle of my cj-6 build. Just finishing the roll cage, and the skelton got me thinking about making it a truck cab with a short bed ,...
I love inline 6s. My 2000 wrangler ( may it rest in peace) could pull out in 3rd with just the clutch, no gas. Lot's of low end. My 09 mustang...
I have a 56 cj-6 that I have crammed a chevy small block into. I have the engine mounted low in the frame , so the stock fan hits the front...
thanks for the input. I have read some the threads and novak sight before I posted. Mainly I was looking for the opinion of someone who had...
I have a 56 cj that I am currently building. Was planning on using a dodge 3.9 with ax-15, but now have to yank it for a cracked block. ( a...
Just because it came off a cj-5 doesn't mean that it was stock. Jeep owners are resourceful. You can find all kinds of non-stock stuff on them....
Converting to saginaw is fairly time consuming and requires some fab work, as you can see by the above paots. Is it worth it? Depends on what you...
quadratec has a similar looking bumper in their cat. Personally, I would build one.
So my steering is in . Made the bracket out of a piece of 3/8 plate. It sits parrellel with the frame. Had to bore a hole thu the crossmember and...
Don't make straight cuts. Make a few dovetail cuts, bevel the edges and fiber/resin them togehter. It will work if you have the patience to do it....
A pic would help but... run a die over them. Most of the stress is held by the taper.
Nice approach. I went a bit different and drilled a hole tru the crossmember and welded in a pipe.
I chose the saginaw and am currently puttin it in. It just seems like parts are more plentiful.
K-W , I will get my kids to take some pics to post.
That's interesting. It has no lift as yet, except that I mounted the body 1.5 inches above stock. I used 1.5 x 3 tubing welded on top of the frame...
I bought a steering box, column, and linkage from a 93 cherokee. I plan on putting in my 56 cj. I have done a search and saw everone's pics. This...
I had a similar experiance with the hubs in my 56 rear. I broke the jc w puller , mande up one that was twice as beefy, broke that, tried heat,...
Separate names with a comma.