It looks like it self clearanced. Should be good now!
That is art! Well done:clap:
I have had the same experience as Nick; Rancho springs have been plenty flexible and predictable and I have seen more suspension complaints solved...
‘How would I know whether to adjust the location of the bracket before welding it in place?” I would use the shackle angle as the indicator, then...
I have been going through my Jeep and correcting the fruits of probably 10 years of neglect by the previous owner. I have been cleaning up wiring...
I had ditched the Ross steering and used an AA bushing and U-joint to keep the original column and steering wheel, and converted to manual Saginaw...
I used this shroud kit from Summit https://www.summitracing.com/parts/sum-380308-sh I was unable to fit a flex fan, not enough clearance on the...
I just added a shroud to mine after the last Rubicon trip and it made a significant difference, even with the original 4 blade fan.
I upgraded to the Dana #39015 many years ago and it has been indestructible. It looks like the stock cover, but is much thicker, and the fill plug...
Here is how I wired my contactor- My 8274 Contactor Upgrade Wiring
Amazing camp ground repair! Great work.
How about these? The Parts Place The Parts Place
Sorry about the delay, I am not near the Jeep. I did find some pictures from the process, though. As I recall, I cut back 5” from the front of the...
I moved the tank to the rear, and gabbed wheelhouse notches, and was able to use seats from a 2001 Subaru, Forester I think. They are really...
I had a similar problem from my supplier when I ordered the blank Yukon drive flanges; no one had them although they showed as being in inventory....
I have the Warn FF kit on my Jeep and I just replaced the rear hubs with the Yukon Gear drive flanges, part #YHC50001. So far they are working...
Alco, the Warn hubs on their full floater kit used ‘blocking rings’ in addition to the usual springs to keep the hubs engaged. Here are the...
I put my contactor/control box on the passenger fender next to the radiator to keep the power leads as short as possible. On mine actually ran...
I recently did this with the Warn 8274 on my ‘5. I used a contactor instead of the solenoid pack and it fit in a plastic MTM shotgun shell box...
My rope arrived today! USArope & Reocovery LLC made good on the order and 150+’ of 5/16” winch rope was delivered to my gate. The rope appears to...
Separate names with a comma.