How about doors? I need to reskin my doors. All my local upholstery shops can't do it. They say I need a long arm sewing machine, which they do't...
I'm an idiot. But I can't tell why I'm an idiot.
They have what it takes! YEAH! thanks be to Paul @ R&P. You the man!:)
It was a bad in the garage yesterday. My CJ5 has an AMC 20 w/ Warn free rolling floating axle kit in it. The axle seal was leaking gear oil. So, I...
Question: Will a Turbo 400 automatic tranny w/D20 fit into a 76' CJ5 w/304 V8? The CJ is only 83" wheelbase. Tranny has bellhousing for a 304, so...
That sounds like fun! Where is the Pavillions?
I am running a SBC V8 and I have the same issue. I installed a Superlift 2.5" lift. I used the standard shackles. My front rides much lower than...
Time to start hunting for information regarding the dash board original configuration. My rig is 62 CJ-5 with a customer dash. Anybody have...
where did you get the bearing? I have a sticking stock pedal assembly, doing the sticky thing. I don't know if the arm is original (doubt it) but...
I was helping a freind move this weekend. The rental truck had a hydraulic lift gate. When transporting the truck the gate folded up underneath....
Here is the pooh. I have a 15 gallon rear tank and the 11 gallon under seat tank. Great for long days of wheeling. Never worry about refueling. I...
No disrepect Walt. 8.1.3 is the charging circuit. 8.2.4 is the ignition circuit. He can have it wired that way and be correct. Its all about where...
This is a good question. I have a 76 CJ-5 w/304 V8 that needs a total exhaust overhaul. There is nothing but 2 Cats and turn out on it now. Can't...
I must agree with the China labor. I run the same switch set up. And had the same issue. Works fine in my hand. Place it in the dash and the...
Sounds like a split down the middle. One thing I did hear was the narrower the tire, the easier the steering. The more aggressive you go, tires...
If you turn the switch to the right, to the first position (click, detent, whatever you want to call it) and the engine turns over, something is...
My 62' has manual steering and a SBC-V8. Fine running around town. But when I air down for the trail it gets a little much. I was thinking about...
You are doing great. You have it wired correctly. Yes, the "4th terminal" (raised up in the middle) is the "s" starter position. Run a wire from...
While searching the Tech Library about a FF kit, I ran across the DIY thread. I was able to pick up a D27A & D44 for next to nothing. Machining...
It's snowing and he's working on the Jeep. Yep, he's addictied! That sounds wunerful, Bill. Seems like you have a pearl there.
Separate names with a comma.