You are right, I was way overthinking this! I plan to tackle this sometime later this summer.....
After reading Norcal's thread on the Howell nightmare, I don't think I'll be going that route. It seems to me that the Sniper 2GC or 2300 kit,...
I'm not opposed to making a crank sensor bracket. I'll go back thru this thread and look at the photos and start a parts list. Thanks
I'd love to hear an update on how the Sniper system and if Howard has made any progress on his box. I'm very interested in converting to EFI!
Nice work...your exhaust and the radiator shroud is giving motivation! Any links to the fan and universal shroud kit? Even with a brand new...
Proto at work for me, same set as above and they get used daily. Knipex is also very good. For transmission work I would recommend a set of...
I run a Novak hydraulic clutch on my 225 SM465 setup. I used an adjustable pivot ball and adjustable throwout bearing to get things correct.
Revival from the past! Would you be willing to share the .dwg file for the rotor? I'm rebuilding my D18 and have planned this mod for a long...
Delo 15W-40 for me only because I buy it on sale at Costco. I also use it as gear oil in my KTM.....works great!
Wow this is great! My Jeeptoberfest 2004 shirt is getting a bit worn after 14 years!
It still has most of the gloss although not as much as the photo. I took that photo before the liner was dry.
[IMG] 2 coats of black Monstaliner. It dries smooth so it doesn't hold dirt. Been over a year and it still looks like new.
Yep. If you do go this route, be sure to get a lang lay cable for maximum abrasion resistance. I work with a lot of wire ropes and rigging in my...
I found that mine was also crooked when changing the oil pump gasket. I was able to use a small seal pick to get it lined back up.
Axle is back in the Jeep and I fired it up last night. The weather was crappy so the initial gear break in drive will have to wait another week...
The cover is on and its back under the Jeep so only time will tell.:driving: Posi, to me your pattern looks deep as well but it could be the...
Separate names with a comma.