I need to redo mine and have gave thought about narrow strips of inner tube, with some type of cement or glued to the bottom of the tunnel...
I’m probably going to experiment with removing some leafs before I get to excited about making drastic changes.
I do a lot of fishing the high lakes, so mostly old logging roads, some basically animal trails. Just looking for a better ride & trying not to...
Really no concern, just trying to get a grasp on which direction I want to take, as my springs are needing replaced soon.
Thanks Howard...I have 12 in the front & 13 in the rear. They are definitely heavy duty, looks like something off of a Kenworth. I can’t imagine...
Does anyone have a good measurement or guess how much the factory springs compress from a relaxed state to vehicle weight? I figure about 1” to 1...
You’re off to a good start. I think your 56 is in better shape than mine was when I started on mine.
Thanks nickmil, that's exactly what I was looking for. The closest thing I found on my searching was the axle lengths of 22 7/8" for short side &...
I'm piecing together a front end on the cheap & I've found a guy with inner axles to go with the housing I have. My question is does anyone have...
Here's the only pic's I have at the moment, these were from the mock up with the 5.3 in it. I'll try to get some more pictures of the finished...
I'll post pic's up Tarry as soon as I figure out how or my son does it for me lol. Robert the box I used was off of a 96 f250. I believe just...
Personally I prefer the reverse steer setup. I have Herm's kit & I used a power box off a 3/4 ton ford truck from the wrecking yard with super low...
That's some pretty good information guy's, I've been considering doing this also to fit a wider radiator for my ls 6 conversation
Thanks for all the good ideas guy's, I finally got them all out now, by the way of the ol drill bit. Actually went pretty good & now she's off to...
Pretty much all of them are messed up from the po, I'm just gonna drill them out, probably be the best bet
Anybody have any tricks to remove the windshield hinge screws? Mine are in pretty bad shape & I have removed a couple with my impact driver, but...
Okay thanks guy's, I may just pass on this one till I get back home & take some measurements & see what I've got going on.
No, I've already changed it over to power steering & have been looking for a column. I've found one while I'm out of state, just was curious...
Does anyone know the length off the top of their head? I'm about 300 miles away from my jeep & have found a great deal on a tilt column, just...
That's exactly how all my free stuff has always turned out, good luck!
Separate names with a comma.